No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionCloud 6.3.1 Management Plane Hybrid Cloud Guide 05

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Mappings Between a Flavor and AZs

Configuring the Mappings Between a Flavor and AZs

The mappings between a flavor and AZs indicate that the ECS flavor in the resource pool can be used in these AZs.

The mappings between flavors and AZs have been preconfigured in the system. Operation administrators can modify the mappings as needed.

Prerequisites

  • You have obtained the username and password of an operation administrator.
  • A resource pool has been accessed and available flavors exist in the resource pool.
  • The mappings between flavors and AZs have been obtained from HUAWEI CLOUD.

Procedure

  1. Use a browser to log in to the ManageOne operation plane as an operation administrator.

    In the non-B2B scenario, the login address format is https://Address for accessing the Console page, for example, https://console.type.com.

    In the B2B scenario, the login address format is https://Address used by operation administrators to access the ManageOne operation plane, for example, https://adminconsole.type.com.

  2. Choose System > Cloud Resource Pool Access from the main menu.
  3. In the navigation pane, choose HUAWEI CLOUD Access.
  4. Click the name of a target HUAWEI CLOUD account.
  5. Click the name of the target resource pool to view its details.
  6. On the Flavor Name tab page, locate the row that contains the target flavor, and click , as shown in Figure 2-2.

    Figure 2-2 Configuring the mappings between a flavor and AZs

  7. In the displayed Configure Mappings Between the Flavor and AZs dialog box, select AZs where the flavor can be used.
  8. Click OK.

    If the selected AZs are displayed in the Availability Zones column in the flavor list, the configuration is successful.

Translation
Download
Updated: 2019-01-17

Document ID: EDOC1100043116

Views: 32486

Downloads: 20

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next