No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionCloud 6.3.1 Management Plane Hybrid Cloud Guide 05

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Usage

Usage

After applying for a HUAWEI CLOUD ECS, you can access the ECS and deploy the required service software on the ECS.

  • Windows HUAWEI CLOUD ECS
    Windows HUAWEI CLOUD ECSs support only password login. If you set Login Mode to Key pair when applying for a HUAWEI CLOUD ECS, you need to obtain the login password from the private key file in .pem format on the ManageOne operation plane. After obtaining the password, you can log in to a Windows HUAWEI CLOUD ECS as the Administrator user in VNC mode or MSTSC mode (remote desktop connection mode). Figure 4-7 shows login modes of a Windows HUAWEI CLOUD ECS.
    Figure 4-7 Modes for logging in to a Windows HUAWEI CLOUD ECS
  • Linux HUAWEI CLOUD ECS
    Linux HUAWEI CLOUD ECSs support login by password login and key pair. Figure 4-8 shows login modes of a Linux HUAWEI CLOUD ECS.
    Figure 4-8 Login modes of a Linux HUAWEI CLOUD ECS
    • If you set Login Mode to Key pair when applying for a HUAWEI CLOUD ECS, you can use PuTTY to interconnect with the public EIP bound to the ECS in SSH mode and log in to the ECS using a key pair.
    • If you set Login Mode to Password when applying for a HUAWEI CLOUD ECS, you can use either of the following methods to log in to the ECS:
      • On the ManageOne operation plane, log in to an ECS in VNC mode as the root user.
      • Use PuTTY to interconnect with the public EIP bound to the ECS in SSH mode and log in to the ECS as the root user.
Translation
Download
Updated: 2019-01-17

Document ID: EDOC1100043116

Views: 33097

Downloads: 20

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next