No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionCloud 6.3.1 Management Plane Hybrid Cloud Guide 05

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Logging In to Windows HUAWEI CLOUD ECSs Using VNC

Logging In to Windows HUAWEI CLOUD ECSs Using VNC

This section describes how to use VNC and enter a password on the ManageOne operation plane to log in to an ECS.


  • You have applied for a HUAWEI CLOUD ECS.
  • A HUAWEI CLOUD ECS to be logged in to must be in the Running state.

    You can change the ECS status by performing operations such as starting or stopping the ECS. For detailed operations, see section Basic Management Operations.

  • If the user password is customized when you apply for the HUAWEI CLOUD ECS, you are advised to log in to the HUAWEI CLOUD ECS 5 minutes after the HUAWEI CLOUD ECS is successfully applied for.
  • If your ECS uses the password authentication mode, you have obtained the password for logging in to the Windows ECS. For details, see section How Do I Obtain the Password for Logging In to a Windows ECS?


  1. Use a browser to log in to the ManageOne operation plane as a VDC administrator, a VDC operator, or an agent administrator.

    In the non-B2B scenario, the login address format is https://Address for accessing the Console page, for example,

    In the B2B scenario, the login address format is https://Address used by VDC users to access the ManageOne operation plane, for example,

  2. In the left part of the main menu, select a region and a project.
  1. Choose Console > Computing > Elastic Cloud Server(HWS) from the main menu.
  2. In the HUAWEI CLOUD ECS list, select the desired HUAWEI CLOUD ECS and click Remote Login, as shown in Figure 4-12.

    Figure 4-12 Remotely logging in to an ECS

  1. Enter the password you set during ECS creation to log in to the ECS.
  2. Initialize the data disk for the HUAWEI CLOUD ECS.

    If a data disk has been added to the HUAWEI CLOUD ECS, you must initialize the data disk before using it. For details, see section Initializing the Data Disk (in the Windows OS).

Updated: 2019-01-17

Document ID: EDOC1100043116

Views: 35035

Downloads: 21

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next