No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSight V300R010C00SPC200, 300, and 500 Local HA System Software Installation Guide (SUSE Linux + Oracle + Veritas) 10

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing the eSight Platform and Components

Installing the eSight Platform and Components

This section describes how to install the eSight platform and components on the SUSE Linux operating system.

Prerequisites

Context

  • You must install eSight of the same version on the primary and secondary servers.
  • The components installed on the primary and secondary servers must be the same.
  • During the installation, the system automatically detects whether the OpenSSH service is enabled. If no, the system forcibly enables the OpenSSH service.
  • When the installation is complete, the system creates a common user for the operating system. The user name is ossuser and its default password is Changeme_123. To change the password, see the section Security Maintenance > Password Change >Changing the OS User Password > Changing the Password of the User for Linux in Maintenance Guide of eSight.

Procedure

  1. Log in to the eSight server as the root user.
  2. Run the following commands:

    # hares -online FloatIP -sys <Name of the host to install eSight>

    # hares -online Netlsnr -sys <Name of the host to install eSight>

    # hares -online RVGPrimary -sys <Name of the host to install eSight>

    You can query the name of the host by the # hostname command.

  3. Create a temporary directory, for example, /opt/install, on the eSight server to store installation files.

    • The eSight installation files must be stored on the local computer.
    • The installation file directory and absolute path can contain only letters, digits, hyphens (-), tildes (~), underscores (_), and periods (.). Otherwise, the installation will fail.

    # mkdir -p /opt/install

  4. Use FileZilla to upload the installation package to /opt/install on the eSight server and run the following commands to decompress the installation package:

    # cd /opt/install

    # unzip eSight_V300R010C00SPC200_SUSE.zip -d /opt/install/eSight

    eSight_V300R010C00SPC200_SUSE.zip indicates the eSight installation package.

  5. Run the following commands to start the eSight installation:

    # cd /opt/install/eSight

    # chmod u+x setup.sh

    # ./setup.sh

  6. Read the license agreement, select Read and Accept License Agreement, and click Install.

    The system automatically checks whether the current environment meets requirements for installing eSight. If no, the associated message is displayed. Perform operations as prompted to ensure that all items meet the requirements and then install eSight again.

  7. On the Set Installation Parameters page, set installation parameters and click Next.

    If the specified installation directory does not exist, the system displays a dialog box The directory xxx dose note exist. Do you want to create it?. In this dialog box, click Yes.

    Table 6-10 Parameter description

    Parameter

    Configuration Requirement

    IP Address Type

    Type of the eSight server IP address. Only supports IPv4.

    Server IP Address

    Set this parameter to floating IP address of the eSight server

    by referring to Collecting Information.

    Server IPv6 Address

    Do not need to set this parameter.

    Server Port

    The default value is 8080. If port 8080 is in use, change it to another port number.

    Installation Directory

    Installation directory of eSight. The default installation directory is /opt/eSight and cannot be changed.

  8. On the Database Parameters page, set database parameters.

    1. Set the parameters based on the Table 6-11.
      Table 6-11 Parameter description

      Parameter

      Configuration Requirement

      Database Server IP Address

      IP address of the database server. Use the default value.

      Administrator Password

      Database administrator password. Manually enter the database administrator password. The default password is Changeme123. If the database administrator password does not meet the password strength requirements, the installation stops. In this case, change the Oracle database administrator password by following instructions in section How Do I Change the Password of an Oracle Database User. When the installation is complete, use the maintenance tool to change the password.

      Database Port

      The default port number is 31521. If the database port number is different from the default port number, manually enter the database port number.

      SID

      The default instance name is esight. If the database instance name is different from the default instance name, manually enter the database instance name.

      NMS User Password

      The system sets this parameter to the NMS user password, which is Changeme_123 by default. After the installation is complete, you can use the maintenance tool to change the password.

      Confirm NMS User Password

      The value must be the same as the value of NMS User Password.

      Data file directory

      The default path for storing data files is /opt/eSightData and cannot be changed.

    2. Click Try.

      If the database is not connected, verify that: Database Server IP Address, Administrator Password, the database port number and instance name are correct.

    3. If try successfully, click Next.

  9. In the Select Software Components To Be Installed window, select the components to be installed by referring to Table 2 Introduction to components and click Next.

    • Component functions are controlled by licenses. If you do not purchase licenses, the functions will be unavailable after installation.
    • Dimmed components are mandatory components to install.
    • eSight components can be installed incrementally. If a component is not installed during eSight installation for the first time, it can be installed later in incremental mode. In this case, the package version for incremental installation must be the same as the current eSight version.

  10. On the Summary page, confirm installation information and click Next.

    • If the installation information is correct, click Next.
    • If the installation information is incorrect, click Previous to reset installation information.

  11. The system starts to install eSight. When eSight is installed, the Installation Success dialog box is displayed. Click Finish.

    The installation takes about 15 minutes.

  12. Run the following commands:

    # hares -offline Netlsnr -sys <Name of the host where eSight is installed>

    # hares -offline FloatIP -sys <Name of the host where eSight is installed>

  13. Repeat 1 and 12 to install eSight and components on the other server.
Translation
Download
Updated: 2019-10-30

Document ID: EDOC1100044372

Views: 32774

Downloads: 26

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next