No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSight V300R010C00SPC200, 300, and 500 Local HA System Software Installation Guide (SUSE Linux + Oracle + Veritas) 10

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Do I Configure the Configuration File Management Function of eSight to Generate a Device Configuration File Copy with a Fixed Name

How Do I Configure the Configuration File Management Function of eSight to Generate a Device Configuration File Copy with a Fixed Name

Question

When backing up the configuration file of a device, the configuration file management function of eSight generates a configuration file whose name contains the backup execution timestamp. Therefore, the backup configuration files cannot be accurately differentiated based on the file name.

In some scenarios (such as zero-touch deployment of a CE device), users need to obtain configuration files with fixed names. Therefore, eSight needs to be configured to copy the backup device configuration files and generate files with fixed names. In addition, a new configuration file backup task needs to be executed for eSight to replace the configuration files with fixed names, ensuring that the latest configuration files are stored.

Answer

  1. Enable the function of generating configuration files with fixed names in the sysconf.properties file.

    By default, this function is disabled in eSight.

    1. Log in to the eSight server as the administrator.
    2. Modify the {eSight installation directory}\AppBase\etc\conffile\sysconf.properties configuration file.
      save.fixed.file.enable=disable

      Set save.fixed.file.enable to enable to enable the function of generating configuration files with fixed names.

    3. Restart eSight for the configuration to take effect.
  2. Back up the device configuration file.

    Choose Resource > Network > Configuration > Configuration File Management from the main menu, choose Manage Config Files > Config Files, select related devices, and back up the configuration files of the devices.

  3. Check the device configuration file backup result.
    1. Log in to the eSight server as the administrator.
    2. Go to the {eSight installation directory}\AppBase\AppBase\var\iemp\data\ftp\configfile directory and verify that the configuration file with the fixed name exists.

Translation
Download
Updated: 2019-10-30

Document ID: EDOC1100044372

Views: 30661

Downloads: 26

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next