No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSight V300R010C00SPC200, 300, and 500 Local HA System Software Installation Guide (SUSE Linux + Oracle + Veritas) 10

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Error 1007 Is Reported During SUSE Linux Installation After RAID Has Been Automatically Configured

Error 1007 Is Reported During SUSE Linux Installation After RAID Has Been Automatically Configured

Symptom

Error 1007 is reported, as shown in Figure 13-3, during SUSE Linux installation after RAID has been automatically configured.

Figure 13-3 SUSE Linux installation error prompt

Possible Causes

During tool-based RAID configuration, RAID initialization is slow when a hard disk has a fault or large capacity. When the RAID tool displays the message "All configuration completed successfully", the initialization is not complete, and the system is still initializing the hard disk. As a result, a partition exception occurs during operating system installation.

Procedure

  1. Click Continue. The SUSE Linux operating system will automatically complete hard disk initialization.
Translation
Download
Updated: 2019-10-30

Document ID: EDOC1100044372

Views: 29446

Downloads: 26

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next