No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSight V300R010C00SPC200, 300, and 500 Local HA System Software Installation Guide (SUSE Linux + Oracle + Veritas) 10

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Do I Synchronize the eSight Server IP Address to eSight (Linux)

How Do I Synchronize the eSight Server IP Address to eSight (Linux)

Question

How do I synchronize the eSight server IP address to eSight after the eSight server IP address is changed?

Answer

Choose appropriate procedures based on the version.

Table 13-1 Procedures for different versions

Version

Scenario

Procedure

V300R010C00

In the southbound and northbound non-isolation scenario, modify the system IP address of eSight.

  1. Log in to the server as the ossuser user.
  2. Stop the eSight service.
  3. Change the IP address of eSight.
    NOTE:

    After the IP address of eSight changes, devices of some types such as IP phones and IADs need to be reconfigured. For detailed configuration data, see the access planning of each device type.

    • Change the IP address using commands. This method is applicable to the SUSE Linux and Euler operating systems.

      es_cli -cmd ipchange

      Change the IP address as prompted.

    • Change the IP address using a graphical tool. This method is applicable only to the SUSE Linux operating system.

      cd eSight installation directory/mttools/tools

      ./ipchange.sh

      In the IP Address Tool dialog box that is displayed, set the new IP address and click Modify.

  4. Start the eSight service.
  5. (Optional) Perform the following operations:

    For a server on which the Unified Communications, Telepresence Videoconference, Video Surveillance, and Database Application components are installed, you must delete devices related to these components from the eSight server before changing its IP address, and then add the devices again.

  6. (Optional) If the server IP address listened by the Oracle database is the same as the system IP address of eSight, change the server IP address listened by the Oracle database and enable the listening service.

In the southbound and northbound isolation scenario, modify the southbound IP address of eSight.

  1. Log in to the server as the ossuser user.
  2. Change the southbound IP address.
    • Change the IP address using a graphical tool. This method is applicable only to the SUSE Linux operating system.

      cd /opt/eSight/mttools/tools

      ./southip.sh

      In the Southbound IP Config Tool dialog box, set New Southbound IP, select After modification or rollback, modify the eSight IP address on the device accordingly, and click OK.

    • Change the IP address using commands. This method is applicable to the SUSE Linux and Euler operating systems.

      es_cli -cmd southip

      Change the southbound IP address as prompted.

  3. Restart eSight.
  4. (Optional) If the server IP address listened by the Oracle database is the same as the system IP address of eSight, change the server IP address listened by the Oracle database and enable the listening service.
Translation
Download
Updated: 2019-10-30

Document ID: EDOC1100044372

Views: 30387

Downloads: 26

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next