No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


eSight V300R010C00 Maintenance Guide 07

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking eSight Alarms

Checking eSight Alarms

Maintenance personnel must periodically check eSight alarms and processes alarms based on suggestions to ensure normal eSight operation.

Reference Standard

Alarms whose alarm source is LocalNMS do not exist, or only Warning alarms exist.


  1. Log in to the eSight.
  2. Choose Fault > Current Alarms from the main menu.
  3. Check alarms whose alarm source is LocalNMS.


    To search for alarms whose alarm source is LocalNMS, you can set the filtering criteria in Filter criteria on the Current Alarms page.

Exception Handling

If Critical, Major, and Minor alarms whose alarm source is LocalNMS exist, the network system is running properly. Perform the following operations:

  1. Click the arrow before a target alarm to expand alarm details.
  2. Click More. In the Alarm Details screen that is displayed, click View details next to Proposed repair actions and clear the alarm based on suggestions.
Updated: 2019-06-30

Document ID: EDOC1100044373

Views: 25083

Downloads: 74

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next