No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSight V300R010C00SPC200, 300, and 500 Maintenance Guide 10

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
PON Management

PON Management

macPoll.xml

Function

The configuration file sets MAC address synchronization.

Path

eSight installation directory/AppBase/etc/access.poll/macPoll.xml

Description

Table 8-209 Parameters in macPoll.xml

Parameter

Description

Setting

Effective Mode

macPoll.switch

Indicates whether to enable MAC address synchronization.

Data type: boolean

Value range: true or false

Default value: true

Restart

Precautions

  • Do not modify the configuration file unless necessary.
  • If you manually modify the configuration items, restart eSight for the modifications to take effect.

Configuration Example

<?xml version="1.0" encoding="UTF-8"?>
<config name="macPoll">
<param name="switch">true</param>
</config>

snmpPoll.xml

Function

The configuration file sets SNMP status polling for OLT and ONU devices.

Path

eSight installation directory/AppBase/etc/access.poll/snmpPoll.xml

Description

Table 8-210 Parameters in snmpPoll.xml

Parameter

Description

Setting

Effective Mode

snmpPoll.switch

Indicates whether to enable SNMP status polling for OLT and ONU devices.

Data type: boolean

Value range: true or false

Default value: true

Restart

snmpPoll.poller-interval

Specifies the polling interval, in minutes.

Data type: integer

Value range: 10-180

Default value: 10

Restart

Precautions

  • Do not modify the configuration file unless necessary.
  • If you manually modify the configuration items, restart eSight for the modifications to take effect.

Configuration Example

<?xml version="1.0" encoding="UTF-8"?>
<config name="snmpPoll">
<param name="switch">true</param>
<param name="poller-interval">10</param>
</config>
Translation
Download
Updated: 2019-10-30

Document ID: EDOC1100044373

Views: 37173

Downloads: 112

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next