No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSight V300R010C00 Maintenance Guide 08

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Storage Management

Storage Management

system.properties

Function

The system.properties configuration file is a configuration file used by the agile reporter server. Parameter system.properties in the configuration file indicates the Secure Sockets Layer (SSL) key used for Hypertext Transfer Protocol Secure (HTTPS) communication.

Path

eSight installation directory/AppBase/UniBI_Server/unibi-solutions/system/conf/system.properties

Description
Table 9-170 Configuration parameters in system.properties

Parameter

Description

Setting

Effective Method

keystorePass

SSL key used by the agile reporter for HTTPS communication

Data type: character string

For details about how Value range: use the encryption tool to encrypt passwords, see Modifying the Encryption Algorithm Key.

Default value: 495453e7d264fa7a164a62be2cb78880bdf9dbaed52275b26df096198cae56f9

Restart

Precautions
  • Modify this configuration file only when necessary.
  • After manually modifying a configuration item, you must restart eSight for the modification to take effect.
  • Modify this file and UniBI.jks at the same time.
Configuration Example
keystorePass=495453e7d264fa7a164a62be2cb78880bdf9dbaed52275b26df096198cae56f9

key1.properties, key2.properties, and Securekey.properties

Function

key1.properties, key2.properties, and Securekey.properties are the key files of the agile reporter. They are used to encrypt and decrypt the passwords of an internal database (Derby database) and a Secure Sockets Layer (SSL) key.

Path

eSight installation directory/AppBase/UniBI_Server/unibi-solutions/security/conf/key1.properties

eSight installation directory/AppBase/UniBI_Server/unibi-solutions/security/conf/key2.properties

eSight installation directory/AppBase/UniBI_Server/unibi-solutions/security/conf/Securekey.properties

Description
Table 9-171 Configuration parameters in key1.properties, key2.properties, and Securekey.properties

Parameter

Description

Setting

Effective Method

unibi.root.encryption.partkey/ unibi.reversible.encryption.key

UniBI encryption algorithm key

Data type: character string

For details about how Value range: use the encryption tool to generate and replace the files, see Modifying the Encryption Algorithm Key.

Default value: 3a239a7668e42d2f6377d2512469d09bd9952ed336a02ac2bc83c331a31c512f

Restart

Precautions
  • Modify this configuration file only when necessary.
  • Changing the key of an encryption algorithm affects the passwords of the internal database and SSL key. If the algorithm key is different from the key for encrypting the passwords of the internal database and SSL key, the UniBI server cannot be started up.
  • After manually modifying a configuration item, you must restart eSight for the modification to take effect.
Configuration Example

key1.properties:

unibi.root.encryption.partkey=73736c6a575a494d5746474e444d5347494b49484f51575241513d5f21393933

key2.properties:

unibi.root.encryption.partkey=6a6e6c626d706d686f7672726672784b5550554653564b58502b3d2132363830

Securekey.properties:

unibi.reversible.encryption.key=906dd79b6e4bab15f85c65c94ecbfaff8856658eb6aacd9173b53b9c56683934b4450265179c2b9fa521da5a234f462c

SftpAndFtp.conf

Function

The SftpAndFtp.conf configuration file is used to change the default password of a File Transfer Protocol (FTP) or Secure File Transfer Protocol (SFTP) user.

Path

eSight installation directory AppBase/lib/com.huawei.esight.it.framework/config/SftpAndFtp.conf

Description
Table 9-172 Configuration parameters in SftpAndFtp.conf

Parameter

Description

Setting

Effective Method

sftpValue

SFTP password, encrypted using Advanced Encryption Standard (AES)

Data type: character string

Value range: unlimited

Default value: Huawei@123 ciphertext

Restart

ftpValue

FTP password, encrypted using AES

Data type: character string

Value range: unlimited

Default value: Huawei@123 ciphertext

Restart

Precautions

Modify this configuration file only when necessary.

Configuration Example
sftpValue=c4986b475961277e2a2c05dfae00a721313c491fb735c8846c0f5d4058c91fcd 
ftpValue=c4986b475961277e2a2c05dfae00a721313c491fb735c8846c0f5d4058c91fcd

report_unibi.properties

Function

The report_unibi.properties configuration file is used to set authentication information provided when eSight invokes the Hypertext Transfer Protocol Secure (HTTPS) service of agile reporter.

Path

eSight installation directory/AppBase/etc/report/report_unibi.properties

Description
Table 9-173 Configuration parameters in report_unibi.properties

Parameter

Description

Setting

Effective Method

unibi.auth.user

Authentication user name provided when eSight invokes the HTTPS service of agile reporter

Data type: character string

Value range: unlimited. Keep the user name same as that in the backendFilter.properties configuration file.

Default value: admin

Restart

unibi.auth.pwd

Authentication password provided when eSight invokes the HTTPS service of agile reporter

The parameter value is a password encrypted using the encryption tool. (The encryption tool is stored in directory eSight\mttools\tools\bmetool\encrypt\.)

Data type: character string

Value range: unlimited. Enter the password encrypted using the encryption tool. For details about the encryption methods, choose eSight Command Reference > Basic Management > Encryption Command Tool.

Default value: @0102000000007b6151e994a35ec9e8650e4c23f8a4a712b7ab6730efa2175c133ced6e118eb1

Restart

Precautions
  • Modify this configuration file only when necessary.
  • After manually modifying a configuration item, you must restart eSight for the modification to take effect.
  • Ensure that the parameter settings are the same as those in the backendFilter.properties configuration file.
Configuration Example
unibi.auth.user=admin 
unibi.auth.pwd=@0102000000007b6151e994a35ec9e8650e4c23f8a4a712b7ab6730efa2175c133ced6e118eb1

backendFilter.properties

Function

The backendFilter.properties configuration file is used to set authentication information for the Hypertext Transfer Protocol Secure (HTTPS) service of agile reporter.

Path

eSight installation directory/AppBase/UniBI_Server/unibi-solutions/system/conf/backendFilter.properties

Description
Table 9-174 Configuration parameters in backendFilter.properties

Parameter

Description

Setting

Effective Method

APICaller

Authentication user name for the HTTPS service of agile reporter

Data type: character string

Value range: unlimited. Keep the user name same as that in the report_unibi.properties configuration file.

Default value: admin

Restart

APIKey

Authentication password for the HTTPS service of agile reporter

The parameter value is a password encrypted using the encryption tool. (The encryption tool is stored in directory eSight/AppBase/UniBI_Server/tools.)

Data type: character string

Value range: unlimited. Enter the password encrypted using the encryption tool. For details about the encryption methods, choose eSight Command Reference > Storage Management > Irreversible Password Encryption Tool of Agile Reporter.

Default value: ffb14457a032dab9630dfdbc6507cf8f0d8f7492e7304974f8bff10853f07eef1c8d72cb17f9fa90d2abb1e40b0298d40626376a070a9142734e78d9130fc3d12049459fe356fddce33a7011ad06f8729518558aa0f5c8aa5671b43dff7fa9494fbddaa261b237aa692b66086da5329f

Restart

Precautions
  • Modify this configuration file only when necessary.
  • After manually modifying a configuration item, you must restart eSight for the modification to take effect.
  • Ensure that the parameter settings are the same as those in the report_unibi.properties configuration file.
Configuration Example
APIKey=ffb14457a032dab9630dfdbc6507cf8f0d8f7492e7304974f8bff10853f07eef1c8d72cb17f9fa90d2abb1e40b0298d40626376a070a9142734e78d9130fc3d12049459fe356fddce33a7011ad06f8729518558aa0f5c8aa5671b43dff7fa9494fbddaa261b237aa692b66086da5329f 
APICaller=admin

UniBI.jks

Function

The UniBI.jks configuration file is a Secure Sockets Layer (SSL) certificate file for the agile reporter to use Hypertext Transfer Protocol Secure (HTTPS) for communication.

Path

eSight installation directory/AppBase/UniBI_Server/tomcat/conf/SSLKey/UniBI.jks

Description
Table 9-175 Parameters in the UniBI.jks file

Parameter

Description

Setting

Effective Mode

None

SSL certificate file for the agile reporter to use HTTPS for communication

For details, see Updating the Tomcat Certificate for the Agile Reporter.

Restart

Precautions
  • Modify this configuration file only when required.
  • After manually modifying a configuration item, you must restart eSight for the modification to take effect.
  • Ensure that the parameter settings are the same as those in the system.properties configuration file.
Configuration Example

For details, see Operation and Maintenance > Maintenance Guide > Security Maintenance > Security Certificates > Replacing the Business Certificate > Updating the Tomcat Certificate of the Agile Reporter.

config.xml

Function

The config.xml configuration file is used to set the login-free function for T series V200R002 and the type of devices discovered by AS400.

Path

eSight installation directory AppBase/etc/esight.storage/config.xml

Description
Table 9-176 Configuration parameters in config.xml

Parameter

Description

Setting

Effective Method

devicemanager.autologin

Sets the login-free function for T series V200R002.

Data type: boolean

Value range:

  • true: enables the login-free function. After the login-free function is enabled, you can directly log in to the device management page of T series V200R002 from eSight.
  • false: disables the login-free function.

Default value: false

Restart

as400.defaultCommandHelper

Sets the type of devices discovered by AS400.

Data type: character string

Value range:

  • file: Simulators are discovered by AS400.
  • telnet: Actual devices are discovered by AS400.

Default value: telnet

Restart

Precautions

Modify this configuration file only when necessary.

Configuration Example
<param name="devicemanager.autologin">false</param> 
<param name="as400.defaultCommandHelper">telnet</param>

period.properties

Function

The period.properties configuration file is used to set a data cycle and a data source for storage reporter and a data delay for performance reports.

Path

eSight installation directory/AppBase/etc/report/period.properties

Description
Table 9-177 Configuration parameters in period.properties

Parameter

Description

Setting

Effective Method

reportperiod

Time dimension table for data generation, expressed in millisecond

Data type: int

Value range: 90000-28800000

Default value: 28800000

Restart

reportdatasource

Data source used by storage reporter for obtaining database data

Data type: character string

Value range: entENTETLDBDataSource

Default value: entENTETLDBDataSource

Restart

capacityPeriod

Period for generating capacity report data

Data type: int

Value range: > 1

Default value: 48

Restart

performancereportperiod

Data delay of performance reports

Data type: int

Value range: 2 to 8

Default value: 2

Restart

Precautions

Modify this configuration file only when necessary.

Configuration Example
reportperiod=28800000  
reportdatasource=entENTETLDBDataSource  
capacityPeriod=48 
performancereportperiod=2

ResExportCfg.xml

Function

The configuration file for exporting information about Huawei storage devices as scheduled.

Path

eSight installation directory/AppBase/app/com.huawei.esight.it.storage/repository/as/com.huawei.esight.it.storage.management.be.export-1.0-SNAPSHOT.jar/META-INF/timeExportConfig/ResExportCfg.xml

Description
Table 9-178 Configuration parameters in ResExportCfg.xml

Parameter

Description

Setting

Effective Method

exswitch

Status of scheduled export.

Data type: character string

Value range:

  • enable: Scheduled export is enabled.
  • disable: Scheduled export is disabled.

Default value: disable

Restart

extime

Time of scheduled export.

Data type: character string

Value range: hh:mm:ss, in the 24-hour format

Default value: 2:00:00

Restart

expath

Path of scheduled export.

Data type: character string

Value range: The absolute path is supported.

Default value: eSight installation directory/Appbase

Restart

Precautions
  • After manually modifying a configuration item, you must restart eSight for the modification to take effect.
  • If no valid path is configured, storage information is exported to eSight installation directory/AppBase by default.
  • If the export path is not a local path (is a removable device drive), the export fails.
  • The time on eSight is used as the export time. If the configuration format is incorrect, 02:00 is used by default.
Configuration Example
<exswitch>disable</exswitch>
<extime>2:00:00</extime>
<expath>E:\data</expath>

healthCheck.xml

Function

Health assessment configuration file.

Path

In configuration file eSight installation directory/AppBase/etc/esight.storage/healthCheck.xml, change the following parameter values:

Description
Table 9-179 Configuration parameters in healthCheck.xml

Parameter

Description

Setting

Effective Method

healthSwitch

Health assessment switch.

Data type: character string

Value range:

  • true: The switch is turned on.
  • false: The switch is turned off.

Restart

ip.properties

Function

Change the IP address of the listening port to the IP address of the network management server.

Path

In configuration file eSight installation directory/AppBase/etc/esight.storage/ip.properties, change the following parameter values:

Description
Table 9-180 Configuration parameters in ip.properties

Parameter

Description

Setting

Effective Method

ip

IP address of the listening port.

Change the parameter value to the IP address of the network management server.

Restart

You are advised to modify the configuration file after the installation is complete.

storageReport.properties

Function

This configuration file is used to modify the capacity usage threshold of the device capacity report.

Path

Modify the following parameters in the eSight installation directory/AppBase/etc/report/storageReport.properties

Description
Table 9-181 Parameters in the storageReport.properties file

Parameter

Description

Setting

Effective Mode

arrayCapUseTrend.important.alarm.threshold

Major alarm threshold for the device capacity usage.

Data type: double

Value range: 0-100

Default value: 60

No restart

arrayCapUseTrend.critical.alarm.threshold

Critical alarm threshold for the device capacity usage.

Data type: double

Value range: 0-100

Default value: 80

No restart

poolCapUseTrend.important.alarm.threshold

Major alarm threshold for the storage pool capacity usage.

Data type: double

Value range: 0-100

Default value: 60

No restart

poolCapUseTrend.critical.alarm.threshold

Critical alarm threshold for the storage pool capacity usage.

Data type: double

Value range: 0-100

Default value: 80

No restart

lunCapUseTrend.important.alarm.threshold

Major alarm threshold for the LUN capacity usage.

Data type: double

Value range: 0-100

Default value: 60

No restart

lunCapUseTrend.critical.alarm.threshold

Critical alarm threshold for the LUN capacity usage.

Data type: double

Value range: 0-100

Default value: 80

No restart

fileCapUseTrend.important.alarm.threshold

Major alarm threshold for the file system capacity usage.

Data type: double

Value range: 0-100

Default value: 60

No restart

fileCapUseTrend.critical.alarm.threshold

Critical alarm threshold for the file system capacity usage.

Data type: double

Value range: 0-100

Default value: 80

No restart

UserInfo.properties

Function

This configuration file is used to manage the user authentication password for the distributed storage device to report data through the southbound REST interface.

Path

eSight installation directory/AppBase/etc/esight.storage/NorthUser/UserInfo.properties

Description
Table 9-182 Parameters in the UserInfo.properties file

Parameter

Description

Setting

Effective Method

password

Authentication password of the southbound REST interface provided by eSight for the distributed storage device to proactively report device change information.

NOTE:

If you need to change the password to ensure communication security, it is recommended that the new password meets the related password complexity requirements.

Data type: character string

Value range: unrestricted

Default value: ciphertext of Huawei@123

Restart

LogPeriod

Interval for the distributed storage device to report device logs, in hours.

Data type: integer

Value range: 1, 2, and 4

Default value: 1

Restart

PushPeriod

Interval for the distributed storage device to report device performance data, in minutes.

Data type: integer

Value range: multiples of 5

Default value: 15

Restart

Heartbeat

Interval for the distributed storage device to send heartbeat messages, in seconds.

Data type: integer

Value range: unrestricted

Default value: 30

Restart

Precautions

Modify this configuration file only when required.

Configuration Example
password=@0102000000007b9281a9959dc249726640a1b26cd4368455319cb61db3cff9114995ac9c2d41
LogPeriod=1
PushPeriod=15
Heartbeat=30

StorageSolution.properties

Function

This configuration file is used to differentiate eSight application scenarios and control the storage domain to enable the southbound REST interface for the distributed storage device to report data.

Path

eSight installation directory/AppBase/etc/esight.storage/NorthUser/StorageSolution.properties

Description
Table 9-183 Parameters in the StorageSolution.properties file

Parameter

Description

Setting

Effective Method

isnfv

Application scenario of the current system. The southbound REST interface is enabled only in the NFV scenario.

Data type: character string

Value range: true and false

Default value: false

Restart

Precautions

Modify this configuration file only when required.

Configuration Example
isnfv=true

storageCustomPing.properties

Function

The storageCustomPing.properties configuration file is used to modify the ping period and the number of ping times. It takes effect only when eSight is restarted or the device is connected. The default ping period is 5 and the default number of ping times is 1.

Path

eSight installation directory/AppBase/etc/oms.fm/storageCustomPing.properties

Description
Table 9-184 Parameters in the storageCustomPing.properties file

Parameter

Description

Setting

Effective Mode

pingCycleTime

Specifies the ping period.

Data type: integer

Value range: 5-60

Default value: 5

This parameter takes effect when eSight is restarted or a device is connected.

pingNum

Specifies the number of ping times.

Data type: integer

Value range: 1-24

Default value: 1

This parameter takes effect when eSight is restarted or a device is connected.

Precautions

Modify this configuration file only when required.

Configuration Example
pingCycleTime=5
pingNum=1
Translation
Download
Updated: 2019-08-03

Document ID: EDOC1100044373

Views: 26783

Downloads: 84

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next