No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


eSight V300R010C00 Maintenance Guide 07

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Discovering Faults

Discovering Faults

This section describes the sources of common faults. After a fault occurs, you need to handle the fault in a timely manner to minimize service loss.

Faults can be detected in the following ways:

  • During routine maintenance, you can discover alarms on the eSight client.
  • During routine maintenance, there is a service exception but no alarm occurs.
  • You receive an alarm information notification by SMS or email and then check whether there is an alarm on the eSight client.
Updated: 2019-06-30

Document ID: EDOC1100044373

Views: 25152

Downloads: 74

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next