No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSight V300R010C00 Maintenance Guide 07

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting the Email Server

Setting the Email Server

You can set the email server parameters for remote alarm notification. When an alarm or event is reported, the eSight sends the alarm or event to users by email.

Procedure

  1. Choose System > System Settings > System Interconnection from the main menu.
  2. On the Email Server page, set the email server, sender address and server port.

    NOTE:
    • The SMTP server requires secure SSL/TLS connections (optional). SSL is short for Secure Sockets Layer and TLS is short for Transport Layer Security.
    • When secure SSL/TLS connections are required, the default port for SSL/TLS is 465. To ensure that emails are sent successfully, check that the email server port is available and the configuration certificate is valid.
    • When secure SSL/TLS connections are not required, the default SMTP port is 25. To ensure that emails are sent successfully, check that the email server port is available.
    • If antivirus software is installed on the eSight server, ensure that email transmission is not prohibited by the software.
    • If you set the domain names but not the IP addresses, the connectivity test may fail because the domain name server (DNS) may fail to parse the domain names. Go to Step 3 to configure extra domain name information on the eSight server.

  3. Configure the domain name of an email server.

    • Windows
    1. Open the DNS configuration file (path: C:\WINDOWS\SYSTEM32\drivers\etc\hosts) of the eSight server.
    2. Append information (IP address and related domain name) similar to the following to the file: 10.10.10.1 smtptest.huawei.com
    • Linux
    1. Run the following command to open the DNS configuration file of the eSight server (rights of the root user may be required to write information to the file):
      su - root 
      vim /etc/hosts     
    2. Append information (IP address and related domain name) similar to the following to the file: 10.10.10.1 smtptest.huawei.com
    3. Run the :wq! command and press Enter to save the settings and exit the edit mode.

  4. Click Apply.

    NOTE:

    Click Test to check the connection to the Email server. The system displays a message showing the connection status. When you test the server connection, if the entered parameter is incorrect, the response will be slow and it might take some time.

Translation
Download
Updated: 2019-06-30

Document ID: EDOC1100044373

Views: 24931

Downloads: 74

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next