No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSight V300R010C00 Maintenance Guide 08

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALM-505001112 File Permissions Are Abnormal

ALM-505001112 File Permissions Are Abnormal

Description

This alarm is generated when the maintenance tool detects that the permissions on the key configuration files in the running environment are inconsistent with the pre-configured permissions. The detection cycle is five minutes. This alarm is automatically cleared when the maintenance tool detects that the file permissions are consistent with the pre-configured permissions.

Attribute

Alarm ID

Alarm Severity

Alarm Type

505001112

Major

Security service or mechanism violation

Parameters

Name

Meaning

Host name

Name of the server for which the alarm is generated.

Product name

Name of the product for which the alarm is generated.

Path

Path to the file on which the permission is abnormal.

Impact on the System

If the permissions on key configuration files are abnormal, some services will be affected.

Possible Causes

Key configuration files do not exist or the permissions on these files are inconsistent with the pre-configured permissions.

Procedure

  1. In the current alarm list, check the fault locating information of the alarm.

    1. In the alarm list on the Current Alarms page, click and view the Alarm Details.
    2. In the Alarm Details, view and record the host IP address and the product name in the Location Info.

  2. Ask the administrator to run the file permission resetting tool on the node of which the IP address is obtained in Step 1. For details, see Administration Guide resetSysPerm.sh.

    • If file permissions are successfully reset, go to Step 3.
    • If file permissions fail to be reset, go to Step 4.

  3. Wait five minutes. In the current alarm list, check whether the alarm is cleared.

    • If yes, no further action is required.
    • If no, go to Step 4.

  4. Collect the information about alarm handling, and contact the technical support personnel.

Clearing

When the fault is eliminated, the system will auto-clear the alarm. Manual clearing is not required.

The following situations cause failures in automatically clearing alarms. Instead, they need to be cleared manually.

  • The name and IP address of the host for which this alarm is generated are changed.
  • The server that generates the alarm is not monitored.

Related Information

None.

Translation
Download
Updated: 2019-08-03

Document ID: EDOC1100044373

Views: 26896

Downloads: 90

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next