No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSight V300R010C00 Maintenance Guide 07

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking Hardware and Peripherals of the eSight Server

Checking Hardware and Peripherals of the eSight Server

This topic describes how to check the status of hardware and peripherals of the eSight server.

Prerequisites

The eSight server is powered on.

Procedure

  1. Refer to the delivery manual of the server according to the server model to check the hardware of the server.
  2. If a disk array is used, refer to the related manual of the disk array according to the disk array model to check the hardware of the server.
  3. Check whether the CD/DVD-ROM runs properly.

Reference Standard

In normal cases, the server and peripherals run properly and all indicators work properly.

Troubleshooting

Refer to the delivery manual according to the models of the server and peripherals to locate faults. If you encounter complicated problems, contact the manufacturer to repair or replace the server.

Translation
Download
Updated: 2019-06-30

Document ID: EDOC1100044373

Views: 24966

Downloads: 74

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next