No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


eSight V300R010C00 Maintenance Guide 07

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking Whether an Alarm is Cleared

Checking Whether an Alarm is Cleared

After an eSight fault is cleared, you can view the current alarm list to check whether the corresponding alarm is cleared.


You have logged in to the eSight.


  1. Choose Fault > Current Alarms from the main menu.
  2. On the Current Alarms page, click to expand the Customize filter criteria area.
  3. In the Customize filter criteria area, set the alarm clearance status to uncleared.
  4. Click Filter.

    Uncleared alarms are displayed in the result list.

Updated: 2019-06-30

Document ID: EDOC1100044373

Views: 25000

Downloads: 74

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next