No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSight V300R010C00 Maintenance Guide 08

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting an IP Address Access Policy

Setting an IP Address Access Policy

You can set the range of IP addresses for logging in to the maintenance tool. Then only IP addresses within the range can be used to log in to the maintenance tool. If the range is not set, all IP addresses can be used to log in to the maintenance tool.

Procedure

  1. Choose System > User Management from the main menu.
  2. On the Client IP Address Policy page, click Create.
  3. On the page that is displayed, set the range of IP addresses that are allowed to access the maintenance tool and click OK.
Translation
Download
Updated: 2019-08-03

Document ID: EDOC1100044373

Views: 26621

Downloads: 84

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next