No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


eSight V300R010C00 Maintenance Guide 07

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting an SMS Modem

Setting an SMS Modem

This topic describes how to set the short message service (SMS) modem parameters. When a device reports an alarm or event, users are notified of the alarm or event using SMS messages and learn about the device status using mobile phones in a timely manner.


You have the operation rights for SMS Settings.


  1. Choose System > System Settings > System Interconnection from the main menu.
  2. In the navigation tree on the left, choose SMS Modem.
  3. On the SMS Modem page, set parameters such as Network system of SMS modem, Server serial port, and SMS modem bound rate.


    When an SMS modem is used to send SMS messages, the NMS server and SMS modem are connected using their serial ports. Serial port connection is hardware-level connection and is secure.

  4. Click Apply.


    Click Test to check the connection to the SMS server. The system displays a message showing the connection status. When you test the server connection, if the entered parameter is incorrect, the response will be slow and it might take some time.

Updated: 2019-06-30

Document ID: EDOC1100044373

Views: 24881

Downloads: 74

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next