No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


eSight V300R010C00 Maintenance Guide 07

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring File Transfer Protocols (Linux)

Configuring File Transfer Protocols (Linux)

eSight supports multiple file transfer protocols, including FTP, TFTP, FTPS, and SFTP. This section describes how to configure the file services in the Linux operating system. Operations in this section are applicable to the SUSE Linux and Euler operating systems.


  1. Log in to the eSight server as the root user.


    If security hardening is performed on the Linux operating system, you need to remotely log in to the server as the ossuser user and switch to the root user.

  2. (Optional) Configure the TFTP file service.

    1. Open the eSight installation directory/AppBase/etc/conffile/tftpconfig.xml file.

      # cd eSight installation directory/AppBase/etc/conffile/

      # vi tftpconfig.xml


      The TFTP protocol has security risks. Therefore, it is recommended that the file service be disabled after use.

      <?xml version="1.0" encoding="UTF-8"?> 
      <config name="tftpServer"> 
      <param name="enable">true</param> 
      <param name="listenerPort">69</param> 
      <param name="passivePorts">32160-32169</param> 

      For details about the parameters, see tftpconfig.xml.

    2. Modify the TFTP parameters as required and save the modification.
    3. Restart eSight.

  3. (Optional) Configure the FTP, FTPS, and SFTP file services.

    1. Open the eSight installation directory/AppBase/sysagent/etc/sysconf/svcbase/med_node_1_svc.xml file.

      # cd eSight installation directory/AppBase/sysagent/etc/sysconf/svcbase


      For details about the parameters, see med_node_1_svc.xml.

    2. (Optional) Configure the FTP file service.

      The FTP protocol has security risks. Therefore, it is recommended that the file service be disabled after use.

      <!-- ftp server configuration --> 
      <config name="ftp"> 
      <!-- Is not activated, defualt false --> 
      <param name="enable">false</param> 
      <!-- Listening port --> 
      <param name="listenerPort">21</param> 
      <param name="passivePorts">32150-32159</param> 
    3. (Optional) Configure the FTPS file service.
                              <config name="ftps"> 
                                      <param name="enable">true</param> 
                                      <param name="listenerPort">31923</param> 
                                      <param name="passivePorts">31932,32145-32154</param> 
                                      <param name="implicitSsl">false</param> 
                                      <param name="includeCipherSuites">TLS_DHE_RSA_WITH_AES_128_CBC_SHA256,TLS_DHE_DSS_WITH_AES_128_CBC_SHA256,TLS_RSA_WITH_AES_128_CBC_SHA256,TLS_DHE_RSA_WITH_AES_128_CBC_SHA,TLS_DHE_DSS_WITH_AES_128_CBC_SHA,TLS_RSA_WITH_AES_128_CBC_SHA</param> 
                                      <param name="keystoreFileName">JettyServerKeyStore</param> 
                                      <param name="sslPassword">TepvToLrYDVuuq2a1/G+Tw==</param> 
                                      <param name="ssl.protocol">TLSv1.1,TLSv1.2</param> 
                                      <param name="permitFileSize">0</param> 
                                      <param name="permitFileType"/> 
    4. (Optional) Configure the SFTP file service.
                              <config name="sftp"> 
                                      <param name="enable">true</param> 
                                      <param name="listenerPort">31922</param> 
                                      <param name="keystoreFileName">esight.keystore.sftp</param> 
                                      <param name="sslPassword">zvOREMT6k4suh87jICjqsQ==</param> 
                                      <param name="permitFileSize">0</param> 
                                      <param name="permitFileType"/> 
                                      <param name="sftpMAC">hmac-sha1,hmac-sha2-256</param> 
                                      <param name="sftpCipher">aes128-ctr</param> 
    5. Change the user password of the file service.

      For details about how to change the password, see Changing the Password of the FTP, FTPS, or SFTP User.

    6. Restart eSight.

Updated: 2019-06-30

Document ID: EDOC1100044373

Views: 25017

Downloads: 74

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next