No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSight V300R010C00SPC200, 300, and 500 Operation Guide 09

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Do I Set the External Service IP Address

How Do I Set the External Service IP Address

Procedure

  1. Choose Topology > Topology Management from the main menu.
  2. Right-click all MPU-R and MPU-T NEs one by one and choose Set Outer Service IP from the shortcut menu.

    NOTE:

    To check whether an NE is a MPU-R or MPU-T NE, perform the following operations:

    1. Choose Resource > Video Surveillance from the main menu.
    2. Choose Resource Management > Monitoring Platform from the navigation tree on the left.
    3. Click the CloudVCN name and choose View > Instance from the navigation tree on the left.
    4. Check the value of Model. If the value is MPU-R or MPU-T, the NE is a MPU-R or MPU-T NE.

  3. Enter the internal management IP address of the MPU-R or MPU-T and click Confirm.
Translation
Download
Updated: 2019-09-12

Document ID: EDOC1100044378

Views: 70798

Downloads: 373

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next