No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


eSight V300R010C00SPC200, 300, and 500 Operation Guide 09

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Importing Virtual Resources in Batches

Importing Virtual Resources in Batches

After a configuration file is imported, the system can create, discover, and add virtual resources to related subnets.


  • You have obtained the IP addresses, user names, and passwords of the devices to be connected.
  • The eSight service has been started.
  • The Virtual Resource Manager (FS/FC/vCenter/ESX) has been installed.


  1. On the menu bar, choose Resource > Common.
  2. In the navigation tree in the left pane, choose Add Resource > Import Resource.
  3. In the function pane, select Virtual Resource.
  4. In the Download template area, click the configuration file template.

    The File Download dialog box is displayed.

  5. Click Save to save the configuration file template locally.

    Ensure that the name of the uploaded configuration file is consistent with that of the downloaded configuration file template.

  6. In the configuration file template, enter discovery information about virtual resources that need to be imported in batches and save the configuration file.
  7. On the device import page, click next to Upload File and select the saved file.
  8. Click Upload to upload the configuration file.

    After the configuration file is uploaded, the information about virtual resources to be imported in batches is displayed.


    If information about a device is incorrectly entered, it is dimmed, and the error information is displayed.

  9. Select the resources and click Create. The system starts discovering the selected virtual resources.


    If some virtual resources fail to be discovered, modify the information about those resources and import and discover them again.

Updated: 2019-09-12

Document ID: EDOC1100044378

Views: 70183

Downloads: 373

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next