No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


eSight V300R010C00SPC200, 300, and 500 Operation Guide 09

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Creating an Interface Group

Creating an Interface Group

You can add multiple interfaces on different devices to a group, so they can be assigned to and managed by users as one object. This improves interface management efficiency.


  • eSight predefines some interface groups. When the predefined interface groups cannot meet user requirements, you can create new interface groups.
  • You can set dynamic rules when you create an interface group. Interfaces that meet the dynamic rules will be automatically added to the interface group. You can also manually add interfaces that do not meet the rules to the group.
  • When the device interface information changes, an interface group is automatically updated. Interfaces that do not meet the dynamic rules are removed from the interface group and interfaces that meet the dynamic rules are added to the interface group.

Interfaces that are manually added to the interface group can only be removed from the group manually.


  1. Choose Resource > Common from the main menu.
  2. Choose Resources Group > Group Management in the navigation area on the left.
  3. Click next to User Defined under Interface Group in the navigation tree to create an interface group.
  4. Set basic information of the interface group.

    Specify a name, group series and provide description for the interface group.

  5. Set group conditions for the interface group.

    1. Set the dynamic conditions to take effect.
      • satisfy all conditions: An interface can be added to an interface group only when it meets all dynamic conditions for the rule.
      • satisfy any condition: An interface can be added to an interface group when it meets any dynamic condition for the rule.
    2. Set a dynamic condition.

      To set multiple dynamic conditions, click next to a dynamic condition.

    After dynamic rules are set, click Preview All. All the interfaces that meet the rules are displayed in Group Members.

  6. Optional: Manually add members to an interface group.

    Click in Group Members. In the dialog box that is displayed, select interfaces to be added to a group and click Confirm.

  7. Click Confirm. An interface group is created.

Related Operations

You can perform the following operations on the Group Management page.

Table 4-4 Operations on the Group Management page



Modifying an interface group

Select the interface group to be modified in the navigation tree, and click.

Deleting an interface group

Select the interface group to be deleted in the navigation tree, and click.

Updated: 2019-09-12

Document ID: EDOC1100044378

Views: 82552

Downloads: 403

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next