No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSight V300R010C00 Operation Guide 07

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
MML Client

MML Client

eSight can use man-machine language (MML) commands to manage NEs of the eIMS device.

Prerequisites

  • You have logged in to the eSight client.
  • You have been assigned the operation rights of managing the eIMS object groups and the MML client.
NOTE:

The product feature you have purchased may use personal data of users (such as IMPU and device IP address) when providing services or maintenance. Therefore, you are obligated to take considerable measures, in compliance with the laws of the countries concerned and the user privacy policies of your company, to ensure that the personal data of users is fully protected.

Procedure

  1. Choose Resource > Collaboration Resource from the main menu.
  2. Choose Network Element Device Management > eIMS Management > MML Client from the navigation tree on the left.
  3. Select device to be operated.

    1. Select Device type and version.
    2. Click Select Device. On the displayed window, select device and click OK.

  4. Enter MML commands in Command to operate device.

Follow-up Procedure

You can perform operations listed in the following table on the MML Client page.

Task

Operation

Setting

You can perform this operation to modify system setting.

  1. Click Setting.
  2. Set Command timeout(s) in System setting.
  3. Set Reserved days for logs, Max. output reports and Parameter count in a line in MML settings.
  4. Click Confirm.

Operation Record

Click Operation Record. The operation log is displayed.

Clear

Click Clear to delete command output information on the screen.

Help

  1. Enter MML commands in Command.
  2. Click Help. Help information about the MML commands is displayed on the screen.
Translation
Download
Updated: 2019-06-30

Document ID: EDOC1100044378

Views: 58847

Downloads: 270

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next