No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSight V300R010C00 Operation Guide 07

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Data Maintenance

Data Maintenance

If eSight data is different from that of the FusionCompute because FusionCompute protocol parameters are changed or eSight is restarted, manually adjust the parameters or synchronize data to ensure data consistency between eSight and the FusionCompute.

Setting Protocol Parameters

If the parameters of communications protocols in the FusionCompute system are modified, eSight must make the same modifications; otherwise, communication exceptions may occur, causing a failure to monitor the FusionCompute system.

Procedure
  1. Choose Resource > Virtual Resources from the main menu.
  2. Choose Virtual Resources > FusionCompute in the navigation area on the left.
  3. Click the name of a FusionCompute you want to modify to access its resource manager.
  4. Set protocol parameters.

    Task Name

    Procedure

    Setting HTTPS parameters

    NOTE:

    If HTTPS parameters are incorrect, the FusionCompute will get offline.

    1. Choose Settings > Https Protocol Parameters in the navigation area on the left.
    2. Enter the new user name and password.
    3. Click Test to verify the user name and password. If they are incorrect, change them and test again.
    4. Click Apply.

    Setting SNMP parameters

    NOTE:
    • If SNMP parameters are incorrect, the FusionCompute cannot automatically report alarms to eSight.
    • If the eSight IP address changes due to IP address change or remote two-node cluster switchover, you need to deliver the eSight IP address to the device again to ensure proper service running.
    1. Choose Settings > Snmp Protocol Parameters in the navigation area on the left.
    2. Modify SNMP parameters.
    3. Select Synchronize SNMP TRAP Settings to FusionCompute.
    4. Click Apply.

Manually Synchronizing Alarms

If the FusionCompute is disconnected from eSight due to the network, manually synchronize alarms from the FusionCompute.

Context

The FusionCompute is disconnected from eSight due to the network. After they are connected again, manually synchronize alarms that are generated during the disconnection period.

Procedure
  1. Choose Fault > Alarm Synchronism from the main menu.
  2. Click Synchronize NE.
  3. In the dialog box that is displayed, choose Group by NE type > FusionCompute.
  4. In the Available Alarm Sources area, select the FusionCompute to synchronize.
  5. Click Confirm.

    The synchronization state and result will be displayed on eSight.

Manually Synchronizing Resource Data

If resources change on devices, you can manually synchronize the latest resource information from the devices.

Context
  • There are component changes on servers used for virtualization, for example, server disk and memory changes, to enable capacity scale-out and scale-in.
  • The network between eSight and FusionCompute controller nodes is down. As a result, resources cannot be synchronized.
Procedure
  1. Choose Resource > Virtual Resources from the main menu.
  2. Choose Virtual Resources > FusionCompute in the navigation area on the left.
  3. Select the devices to be synchronized and choose Synchronize Data > Start Synchronization above the list.

    Figure 11-9 Resource data synchronized successfully

Translation
Download
Updated: 2019-06-30

Document ID: EDOC1100044378

Views: 59327

Downloads: 270

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next