No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSight V300R010C00 Operation Guide 07

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Viewing Microwave Device Details

Viewing Microwave Device Details

You can view basic information about a microwave device. In addition, you can go to the LCT page of the device to view and configure more attributes and functions of the device.

Procedure

  1. Go to the microwave device details page in either of the following ways:

    • Through the microwave device management page
      1. Choose Resource > Microwave from the menu bar to go to the microwave device management page.
      2. Click a device to go to the microwave device details page.

    • Through the main topology
      1. Choose Topology > Topology Management from the menu bar to go to the main topology page.
      2. Right-click a microwave device and choose Device Information from the shortcut menu, or double-click a device.

  2. View basic device information.

    Choose View > Basic Information in the navigation tree on the left.

  3. View device alarms.

    Choose View > Alarm List in the navigation tree on the left.

  4. View the device lithium battery information.

    Choose View > Lithium Battery Information in the navigation tree on the left.

    NOTE:

    Only the PowerCube 500-T device has lithium battery information. You can choose Resource > Microwave > Device Management > Integrated Site Device and select the PowerCube 500-T device.

  5. Go to the device built-in web page, and query and configure NEs.

    1. Choose Device Config > Web NMS in the navigation tree on the left, enter the user name and password of the device, and click Login to go to the device built-in web page.
      NOTE:

      The eSight server and devices must be directly connected. A device cannot be created on eSight by forwarding the device IP address. Otherwise, the web page of the device cannot be accessed.

    2. View and configure device functions on the web page, including NE attribute query, time synchronization, time zone setting, communications parameter management, alarm browsing, and device user management.

Translation
Download
Updated: 2019-06-30

Document ID: EDOC1100044378

Views: 59551

Downloads: 272

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next