No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


eSight V300R010C00SPC200, 300, and 500 Operation Guide 09

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Product Overview

Product Overview

The microwave component supports the management of the PowerCube 500-T, RTN510 AP, RT II, and RTN510 RT devices. This section describes the purpose, feature, and positioning of the devices.

PowerCube 500-T

Huawei PowerCube 500-T hybrid power supply solution is widely used in safe city and smart city projects to provide power supply and support for video surveillance cameras and provide power supply and receiving space for data transmission devices. In addition, PowerCube 500-T can also provide power supply and support for devices such as the solar streetlight and hotspot coverage devices.

PowerCube 500-T supports mains and solar power supplies. Currently, it provides the solar, electrical hybrid, and photoelectric solutions, covering all scenarios with or without mains.

The PowerCube 500-T supports output voltage systems of 12 Vdc, 24 Vac, 48 Vdc, and 220 Vac at the same time. It can provide power supply for cameras and transport devices such as small routers, PONs, CPEs, and APs.

For more documents about the device, visit Huawei support websites:

Carrier: Support > Product Support > Network Energy > Telecom_Energy > Hybrid_Power > Hybrid Power. > PowerCube 500

Enterprise: Support > Network Energy > Hybrid Power > PowerCube 500


RTN510 is the first Sub 6G microwave transmission system launched by Huawei. It consists of Access Point (AP), RT II, and Remote Terminal (RT) and can provide low-cost Point-to-Point (PtP) and Point-to-Multipoint (PtMP) transmission solutions in the Line of Sight (LOS) or Non Line of Sight (NLOS) environments.

The following figure shows the core components of the PtP and PtMP solution.

The Sub 6G microwave solution uses the 4.9-5.9 GHz frequency band, which is a free-of-charge frequency band for most countries and regions. Except for some sub frequency bands, most frequency bands require no license. That is, free-of-charge frequency bands can be directly used.

Table 21-1 describes the performance of each RTN510 component.

Table 21-1 Performance of each RTN510 component





Frequency band

4.910-5.970 GHz

Channel spacing


Modulation format


Switching capacity

200 Mbit/s-3.8 Gbit/s

100 Mbit/s

2 Gbit/s

Service interface

  • Supports one GE optical interface.
  • Supports two GE electrical interfaces, one of which provides the PoE function.

Supports one GE electrical interface, which provides the PoE function.

Supports two GE electrical interfaces, one of which provides the PoE function.

Updated: 2019-09-12

Document ID: EDOC1100044378

Views: 82368

Downloads: 403

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next