No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSight V300R010C00 Operation Guide 07

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Monitoring the QoS Service

Monitoring the QoS Service

QoS service monitoring helps network maintenance personnel quickly find potential areas with abnormal QoS traffic.

Checking a Dashboard

  1. Choose Resource > Network > Business > QoS Management from the main menu.

  2. In the navigation tree, choose QoS > Dashboard.
  3. Create a dashboard.

    1. Click at the upper right corner of the page.
    2. On the page that is displayed, set the dashboard name and filtering criteria.
    3. Click OK.

  4. Add a portlet.

    1. Click Customize at the upper right corner of the page.
    2. In the dialog box that is displayed, click to add a portlet on a dashboard or click to remove a portlet from the dashboard.

  5. Click hidden in the portlet title row, set parameters, and check the monitoring.

Viewing Historical Data

eSight supports historical data query by interface and VLAN. The query procedure is similar for the two modes. This section describes how to query historical data by interface.

  1. Choose Resource > Network > Business > QoS Management from the main menu.

  2. Choose QoS > Historical Data from the navigation tree.
  3. Click Select Interface.
  4. In the dialog box that is displayed, select the interface to be viewed and click OK.

    NOTE:

    If performance monitoring tasks have been created for both interface inbound and outbound directions, you must also select the interface traffic direction.

  5. On the Historical Data page where the statistics graphs for indicators of the interface are displayed, perform the following operations as required:

    • You can set the indicator value time span in the filter area in the upper part of the page.
    • Switch indicators on the right of the collapsed area.
    • (Optional) Select Auto Refresh and the data will be automatically synchronized and refreshed.
    NOTE:

    Historical data is automatically updated at an interval of 5 minutes.

Translation
Download
Updated: 2019-06-30

Document ID: EDOC1100044378

Views: 59205

Downloads: 270

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next