No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


eSight V300R010C00SPC200, 300, and 500 Operation Guide 09

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Customized Configuration Management

Customized Configuration Management

Describes how to create a customized configuration.

Creating a Customized Configuration

Describes how to create a customized configuration.


You can configure storage resources using a web page or customized script. The customized configuration script is executed on storage devices to flexibly deploy your configuration. You can use a customized script to configure disk domains, storage pools, LUNs, hosts, host groups, port groups, mappings, file systems, and share permission.


  1. On the menu bar, choose Resource > Storage Subnet.

  2. In the navigation tree, choose Storage Resources Allocation > Customized Script Configuration.
  3. Enter a name and description.

    For example:

    Name: disk_domain

    Description: Create a script for disk domain configuration.

  4. Select the storage device where you want to execute the script.
  5. Set configuration parameters.

    For details about the supported customized scripts and examples, see Customized Script Usage Guide.

    • Configuration: You can create a new configuration task or use an existing one.
    • Script: Enter a configuration script. For example: create disk_domain name=domain1

  6. If you want to save the configured parameters as a common configuration task, select Save as a common configuration and enter a name for the task.
  7. Click Next.
  8. Confirm the configuration information and click Execute.

    A message box is displayed.

  9. Click OK.

    You can click to view the task execution results.

    The task details will be displayed on the Tasks page.

Updated: 2019-09-12

Document ID: EDOC1100044378

Views: 72107

Downloads: 378

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next