No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


eSight V300R010C00SPC200, 300, and 500 Operation Guide 09

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Modifying Keystone URL Protocol of OpenStack at eSight

Modifying Keystone URL Protocol of OpenStack at eSight

Procedure to modify Keystone URL Protocol of 3rd Party Openstack in eSight server.

Based on the customer openstack Keystone URL Protocol, eSight need to configure for the right Keystone URL Protocol using below procedure.


  1. Login to active eSight Server with user name ossuser.
  2. Into /opt/eSight/AppBase/etc/openstack directory.Run the following command to view the file.

    > vi

  3. Press i to enter the edit mode.configure the details of Keystone URL Protocol information.

    # https/http supported

    There is a security risk in using the HTTP protocol. It is recommended to use HTTPS to access and manage Red Hat OpenStack.

  4. Press Esc and run the :wq! command to save the settings and quit the editing mode.


    One eSight server will support either one protocol of keystone.

  5. Restart the eSight and validate by adding Redhat OpenStack using respective Keystone URL Protocol.

Updated: 2019-09-12

Document ID: EDOC1100044378

Views: 71810

Downloads: 378

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next