No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


eSight V300R010C00SPC200, 300, and 500 Operation Guide 09

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting Netconf Parameters on eSight

Setting Netconf Parameters on eSight

  1. Choose Resource > Common > Add Resource > Protocol Template > Netconf Template from the main menu.
  2. Click Create and set parameters according to the plan.

  3. Choose Resource > Network > Equipment > Network Device from the main menu.

  4. Select the devices for which Netconf parameters are to be set, choose Set Protocol > Set Netconf Parameters, and select the configured Netconf template.
Updated: 2019-09-12

Document ID: EDOC1100044378

Views: 72804

Downloads: 378

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next