No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSight V300R010C00 Operation Guide 07

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Can eSight Display Network Device Layer-2 Links on the Topology Management Page and Network Device Layer-3 Links on the IP Topology Management Page

How Can eSight Display Network Device Layer-2 Links on the Topology Management Page and Network Device Layer-3 Links on the IP Topology Management Page

Answer

  • By default, both Layer 2 and Layer 3 links are displayed on the Topology Management page.

    Choose Topology > Topology Management from the main menu. Click Topology Display Settings, select Link Filter, and select link types to be displayed on the Topology Management page.

  • Only Layer 3 links are displayed on the IP Topology Management Page, and no additional configuration is required.
Translation
Download
Updated: 2019-06-30

Document ID: EDOC1100044378

Views: 59834

Downloads: 274

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next