No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSight V300R010C00SPC200, 300, and 500 Operation Guide 09

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Device Adaptation Package Management

Device Adaptation Package Management

This section describes how to install a device adaptation package.

Prerequisites

  • You have a user account at http://support.huawei.com, and you are authorized to download software packages.
  • You have been assigned the operation rights of managing the video surveillance object groups and the device adaptation package.

Procedure

  1. Obtain the NE adaptation package and verify its integrity.

    1. Visit https://support.huawei.com/enterprise/en/category/video-surveillance-pid-1482615596259?submodel=21565781, and select the type and version of the CloudIVS based on the version mapping.
    2. Obtain the NE adaptation package and corresponding signature file with the file name extension .asc.
      NOTE:

      Currently, only the CSP provides device adaptation packages. The device adaptation package of the CSP is named in iManagerOSS_CSP_MATCH_VXXXRXXXCXXSPCXXX_Edge_pkg.zip format.

    3. Use the digital certificate and verification tool provided on Huawei technical support website to verify the package integrity.

      You can obtain the digital certificate, verification tool, and usage guide from the following address:

      https://support.huawei.com/enterprise/toolsinfo?lang=en&idAbsPath=0602_ROOT|8221819&pid=8221819&show=showVDetail&toolId=TL1000000054

    4. After the verification is successful, decompress the NE adaptation package on the PC.

      In the decompressed file, choose the .tar OSS adaptation package based on the site requirements.

  2. Log in to the eSight client.
  3. Choose Resource > Video Surveillance from the main menu.
  4. Choose Video Surveillance > System Settings > Adaptation Package Management from the navigation tree on the left.
  5. Click .
  6. On the Adaptation Package Management page, click and select an adaptation package.
  7. Click OK.

    The adaptation package is uploaded and installed.

    NOTE:

    On the Video Surveillance > Resource Management > Monitoring Platform page:

    • If the device version is later than the version of the currently installed alarm adaptation package, a dialog box is displayed, indicating that some alarms cannot be reported.
      • The alarm adaptation package may not be released for device patch versions. If the new alarm adaptation package does not need to be installed for the new device version, click Do not show again. No notification is displayed if the device version remains unchanged later.
      • If the device is upgraded cross versions, you need to install the related alarm adaptation packages of intermediate versions.
    • Only users with the device operation permission can click Do not show again.

Translation
Download
Updated: 2019-09-12

Document ID: EDOC1100044378

Views: 80538

Downloads: 400

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next