No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSight V300R010C00 Operation Guide 07

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Selecting Multiple Associated Reports to Create a Dashboard

Selecting Multiple Associated Reports to Create a Dashboard

  1. Choose Report > Report from the main menu.

  2. Create a dashboard.
    • Click at the upper right corner of the manager.
    • Click on the Welcome tab page.
  3. Set dashboard parameters and click OK.

  4. On the dashboard, click to select associated reports and configure the association among the reports.
    NOTE:

    The imported reports can be associated only when they have the same fields.

    1. Configure link filtering for the secondary report.

      Click at the upper right corner of the secondary report area, and choose Edit report to open the secondary report. Right-click the dimension to be linked and choose Filter from the shortcut menu. On the page that is displayed, set the fields to be linked and save the report.

    2. Set the linkage parameters of the primary report on the dashboard.

      In the Objects area, select the report that serves as the main report and set linkage fields on the Link Settings page.

    3. Click Apply. The linkage field in the primary report is displayed as a link.

    4. Set the linkage relationship for the secondary report.

      In the Objects area, select a report that serves as the secondary report, and configure the linkage relationship on the Parameters page. Click Apply. The linkage relationship is established.

    5. Click the link field in the primary report. Data in the secondary report is updated.

Translation
Download
Updated: 2019-06-30

Document ID: EDOC1100044378

Views: 58685

Downloads: 270

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next