No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSight V300R010C00 Operation Guide 07

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Adjusting Resources

Adjusting Resources

When the network structure changes, you can adjust resources (mainly refer to subnets and devices) as required.

Prerequisites

You have the resource operation rights.

Procedure

  • Adjust a subnet.
    1. Choose Resource > Common from the main menu.
    2. Choose Resources Group > Subnet in the navigation area on the left.
    3. On the Subnet page, select the subnet to be adjusted, and click Move Node.
    4. Select the target subnet on the Move Node page.
    5. Click OK.
  • Adjust a device.
    1. Choose Resource > Device Type from the main menu, such as Resource > Virtual Resources.
    2. Choose the device type in the navigation tree on the left.
    3. On the Device Management page, select the device and click Move.
    4. Select the target subnet on the Select Target Subnet page.
    5. Click OK.
Translation
Download
Updated: 2019-06-30

Document ID: EDOC1100044378

Views: 59032

Downloads: 270

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next