No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSight V300R010C00SPC200, 300, and 500 Operation Guide 09

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Why Cannot Industry Terminals Be Added to eSight Normally

Why Cannot Industry Terminals Be Added to eSight Normally

Question

Why cannot industry terminals be added to eSight?

Answer

By default, the more secure digest authentication algorithm, ACS server algorithm, and file server algorithm are used for adding industry terminals to eSight. To ensure that the industry terminals can be added to eSight normally, the industry terminals must support the same algorithms. If the industry terminals do not support the algorithms, you can change the security algorithm on eSight.

By default, eSight uses a more secure encryption suite algorithm. Other encryption algorithms have security risks. Exercise caution when using other encryption algorithms.

Linux Operating System

  1. Log in to the eSight server as the ossuser user.
  2. Modify the cpeCommon.properties configuration file.

    1. Go to the directory where the configuration file is located.

      cd eSight installation directory/AppBase/etc/ewl

    2. Edit the configuration file.

      vi cpeCommon.properties

      Set cpe_tr069_digest_algorithm to MD5.

      After the modification is complete, press Esc and run the :wq command to save the modification and exit.

  3. Modify the AcsServer.xml configuration file.

    1. Go to the directory where the configuration file is located.

      cd eSight installation directory/AppBase/etc/ewl

    2. Edit the configuration file.

      vi AcsServer.xml

      Set ssl.include.ciphers to security algorithms supported by the industry terminal. You are advised to set it to all algorithms within the value range.

      After the modification is complete, press Esc and run the :wq command to save the modification and exit.

  4. Modify the fileserver.xml configuration file.

    1. Go to the directory where the configuration file is located.

      cd eSight installation directory/AppBase/etc/ewl

    2. Edit the configuration file.

      vi fileserver.xml

      Set ciphers to security algorithms supported by the industry terminal. You are advised to set it to all algorithms within the value range.

      After the modification is complete, press Esc and run the :wq command to save the modification and exit.

  5. Restart the eSight service.

Windows Operating System

  1. Log in to the eSight server as the Administrator user.
  2. Modify the cpeCommon.properties configuration file.

    1. Go to the directory where the configuration file is located.

      eSight installation directory/AppBase/etc/ewl

    2. Edit the configuration file.

      cpeCommon.properties

      Set cpe_tr069_digest_algorithm to MD5.

      After the modification is complete, save the modification and exit.

  3. Modify the AcsServer.xml configuration file.

    1. Go to the directory where the configuration file is located.

      eSight installation directory/AppBase/etc/ewl

    2. Edit the configuration file.

      AcsServer.xml

      Set ssl.include.ciphers to security algorithms supported by the industry terminal. You are advised to set it to all algorithms within the value range.

      After the modification is complete, save the modification and exit.

  4. Modify the fileserver.xml configuration file.

    1. Go to the directory where the configuration file is located.

      eSight installation directory/AppBase/etc/ewl

    2. Edit the configuration file.

      fileserver.xml

      Set ciphers to security algorithms supported by the industry terminal. You are advised to set it to all algorithms within the value range.

      After the modification is complete, save the modification and exit.

  5. Restart the eSight service.
Translation
Download
Updated: 2019-09-12

Document ID: EDOC1100044378

Views: 70092

Downloads: 373

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next