No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSight V300R010C00 Operation Guide 07

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Operation Procedure (SMS Message-based Provisioning)

Operation Procedure (SMS Message-based Provisioning)

This topic describes the operation procedure of SMS message-based provisioning of eSight for ARs, helping you quickly master SMS message-based provisioning operations.

Table 12-35 Operation procedure of SMS message-based provisioning

Step

Operation

Description

1

Configure the SMS server.

Ensure that the connectivity test of the SMS server is successful.

NOTE:

SMS message-based provisioning can only send SMS messages through the SMS server or SMS modem.

2

Make device files.

Prepare configuration files and software packages in advance to facilitate quick deployment.

3

Set SIM card parameters.

The hardware installation engineer collects SIM-related information and sends the information to the network administrator. The network administrator records the SIM-related information on eSight.

4

Configure SMS message parameters.

Configure APN parameters for SMS messages and eSight server parameters to ensure that AR routers can connect to eSight to download files.

5

Create an SMS message-based deployment task and deploy devices.

The network administrator records related information about AR routers to be deployed and imports the information to eSight.

Associate files with the devices to be deployed, facilitating file uploading during SMS message-based provisioning.

Making Device Files

  1. Choose Resource > Network > Zero Touch Provisioning > Configuration File Making from the main menu.

  2. Make device files.
    • In the navigation tree on the left, choose Make Configuration Template and create the configuration file.

      For the commands that are not included in the predefined template, you can manually enter the commands and parameters to improve the configuration efficiency.

    • In the navigation tree on the left, choose Upload Device Software and check the device software.

      If required software is unavailable, Choose Resource > Network > Configuration > Device Software Management from the main menu and choose File Management from the navigation tree on the left to upload the corresponding files.

Setting SIM Card Parameters

  1. Choose Resource > Network > Zero Touch Provisioning > Short Message-based Provisioning from the main menu.

  2. In the navigation tree on the left, choose Manage SIM Card and set SIM card parameters.

Configuring SMS Message Parameters

  1. Choose Resource > Network > Zero Touch Provisioning > Short Message-based Provisioning from the main menu.

  2. In the navigation tree on the left, choose Manage Short Message and set SMS message parameters.

Performing SMS Message Deployment

  1. Choose Resource > Network > Zero Touch Provisioning > Short Message-based Provisioning from the main menu.

  2. In the navigation tree on the left, choose Short Message Deployment and perform SMS message-based provisioning.
Translation
Download
Updated: 2019-06-30

Document ID: EDOC1100044378

Views: 58179

Downloads: 268

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next