No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


eSight V300R010C00SPC200, 300, and 500 Operation Guide 09

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Resource Addition

Resource Addition

The eSight can connect terminals by means of subnet creation, batch importing, or access scan for you to manage terminals on eSight.

  • When you connect a terminal to eSight, if ACS Address configured on the terminal is set to the eSight IP address, the eSight IP address cannot be changed. If the eSight IP address is changed, terminals will be disconnected from eSight.
  • If the eSight IP address needs to be changed, when connecting a terminal to eSight, set the ACS Address configured on the terminal to the eSight domain name. After the eSight IP address is changed, change the IP address corresponding to the eSight domain name on the DNS server and DHCP server to the new IP address. The new IP address can take effect 24 hours later. Before it takes effect, eSight and terminals will be disconnected.
Updated: 2019-09-12

Document ID: EDOC1100044378

Views: 70205

Downloads: 373

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next