No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


eSight V300R010C00SPC200, 300, and 500 Operation Guide 09

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Storage Network Analysis Introduction

Storage Network Analysis Introduction

The storage network analysis component is a professional monitoring and analysis tool dedicated to SAN storage network environments.


The storage network analysis component is a professional monitoring and analysis tool dedicated to SAN storage network environments.


The storage network analysis function provides professional tools for monitoring and analyzing SAN storage network environments. By displaying the application and host heat map, applications and host hotspot charts, the system allows users to view the average IOPS and latency of applications and hosts in the last 24 hours, helping users identify applications and hosts with low service response efficiency.

Checking the Storage Network Analysis View

On the storage network analysis view, users can intuitively view the average IOPS and delay of applications and hosts in the last 24 hours.

Figure 10-30 Checking the storage network analysis view

Host Path Graph

During network analysis, users can directly switch from the host network analysis view to the host path diagram of the target host to view the mapping between the select hosts, applications, and storage resources.

The host path graph illustrates the mapping among the hosts, applications, disks, ports, switches, disk arrays, storage controllers, storage devices, and LUNs. By viewing alarms in the view, users can easily locate and analyze alarms and faults in the topology.

Figure 10-31 Host path graph

Viewing the Host Performance Analysis Graph

The performance analysis page on the host path diagram displays the delay performance curve of the current disk. In addition, the page displays the fault demarcation analysis conclusion based on historical delay data.

Figure 10-32 Viewing the host performance analysis graph

Application Restrictions

  • Only eSight that is equipped with Storage Device Manager and host management component can use the storage network analysis function.
  • The fault demarcation and analysis functions depend on the delay threshold configured on the host.
  • The host heat map displays only hosts that are connected through an agent.
  • Currently, storage network analysis does not support the DST function.



Updated: 2019-09-12

Document ID: EDOC1100044378

Views: 72495

Downloads: 378

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next