No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


eSight V300R010C00SPC200, 300, and 500 Operation Guide 09

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Device Adaptation Package Management

Device Adaptation Package Management

This section describes how to install an NE device adaptation package.


  • You have a user account at, and you are authorized to download software packages.
  • You have been assigned the operation rights of managing the IoT object groups and the device adaptation package.


  1. Obtain the NE adaptation package and verify its integrity.

    1. Obtain the NE adaptation package with the extension .zip and the adaptation package signature file with the extension .asc from
    2. Use the digital certificate and verification tool provided on Huawei technical support website to verify the package integrity.

      You can obtain the digital certificate, verification tool, and usage from the following address:|8221819&pid=8221819&show=showVDetail&toolId=TL1000000054

    3. After the verification is successful, decompress the NE adaptation package on the PC.

      In the decompressed file, choose the .tar OSS adaptation package based on the site requirements.

  2. Log in to the eSight client.
  3. Choose Resource > IoT from the main menu.
  4. Choose Device Adaptation Management from the navigation tree on the left.
  5. Click .
  6. In Device Adaptation Management page, click and choose adaptation package.
  7. Click Confirm.

    The adaptation package is uploaded and installed.

Updated: 2019-09-12

Document ID: EDOC1100044378

Views: 69263

Downloads: 371

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next