No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSight V300R010C00 Operation Guide 07

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
eIMS Device

eIMS Device

eSight can manage NEs of the eIMS device added to it in a centralized manner.

Procedure

  1. Choose Resource > Collaboration Resource from the main menu.
  2. Choose Network Element Device Management > eIMS Management > eIMS Device from the navigation tree on the left.

    Table 17-1 Description of the eIMS Device page

    Area

    Description

    1. Toolbar

    Description

    2. Device display information

    Displays basic information and operations of the eIMS device.

    Name

    Device name.

    Connection Status

    Connection status of the device, which can be Offline or Online.

    IP Address

    Device IP address.

    Subnet

    Subnet of a device.

    Device Type

    Device model.

    Software Version

    Device software version.

    Vendor

    Device vendor.

    Last Modified At

    Last time when the device is modified.

    NE Creation Time

    Time when the NE is created.

    NE Creation Mode

    Mode in which the NE is created.

    Inaccessibility Duration/s

    Total length in offline state after the device is automatically added to eSight.

    Location

    Physical location of the device.

    Management Status

    Management status of the device, which can be Normal or Disable.

    Last Synchronized At

    Last time when information is synchronized on the device.

    Remark

    Device description.

    Operation

    You can perform the following operations: Locate in Topology, Modify, Delete, and Reset Password.

    Select items to be displayed in the device information list.

    NOTE:

    You can click on the upper right corner of the device list to filter display information.

  3. You can perform the following operations on the eIMS Device page.

    Task

    Operator

    Add eIMS devices

    Add a single eIMS device

    1. Click Add. The Add Device page is displayed.
    2. Set the IP address, Name, Subnet, Device type.

      If the Device type is set to eCGPOMU, you need to set Connection mode and specify whether to enable the Allow anonymous function.

    3. Set the SNMP.

      The SNMP version is V3, you need to set Security name, Authentication protocol, Authentication password, Privacy protocol, Privacy password and Timeout interval.

      NOTE:

      Contact the NE administrator for SNMP parameters.

    4. Click OK.
    NOTE:

    After the eCGPOMU is added, its managed sub-NEs are automatically added.

    Delete devices

    You can delete information about the eIMS devices when eSight no longer manages these devices.

    NOTE:

    After the eCGPOMU is deleted, its managed sub-NEs are automatically deleted.

    • Delete information about a single eIMS device.
      1. Click next to the target device.
      2. Click Yes in the Confirm dialog box.
    • Delete information about multiple eIMS device in a batch.
      1. Select devices you want to delete.
      2. Click Delete above the list.
      3. Click Yes in the Confirm dialog box.

    Synchronize Configuration

    NOTE:

    Configuration synchronization takes effect for the eCGPOMU and the sub-NEs managed by it.

    • Start synchronization
      1. Select the device to be synchronized in the device information list.
      2. Click Synchronize Configuration and select Start Synchronization.
    • Status monitoring
      1. Click Synchronize Configuration and select Status Monitoring in the device information list.
    • Parameter setting
      1. Click Synchronize Configuration and select Parameter setting in the device information list.

    Move

    You can perform this operation to modify the subnet of the device.

    1. Select a device to be adjusted and click Move.
    2. Select the target device on the Move page and click OK.
    3. Click Yes in the Confirm dialog box.

    Locate in Topology

    Click next to the device list. The Topology Management page is displayed.

    Modify Information

    You can perform this operation to modify device information.

    1. Click next to the target device. The page for modifying device information is displayed.
    2. Modify device information on the page that is displayed.
    3. Click OK.

    Reset Password

    You can perform this operation to modify the password of the emscomm account and the soapuser account.

    1. Click next to the target device.
    2. On the page that is displayed, modify the password of the emscomm account or the soapuser account.
    3. Click OK.

    Modify SNMP Information

    1. Click in the Operation column of the target device.
    2. Modify SNMP information on the page that is displayed.

      The SNMP version is V3, you need to set Security name, Authentication protocol, Authentication password, Privacy protocol, Privacy password and Timeout interval.

      NOTE:

      Contact the NE administrator for SNMP parameters.

    3. Click OK.

Basic Information

The Basic Information page displays the basic information and operation information of the eIMS device.

Table 17-2 Operations

Operation

Description

Procedure

View Topology

Allows you to view the device in the network topology.

Click View Topology. You can view the device topology on the Topology Management page.

Configuration synchronize

Allows you to synchronize configuration data.

Click Synchronize Configuration. eSight starts to synchronize configuration data.

Configuration Data

This topic describes how to view and export NE of the eIMS device configuration data.

Prerequisites
  • You have logged in to the eSight client.
  • You have been assigned the operation rights of managing the eIMS object groups and eIMS devices.
Procedure
  1. Choose Resource > Collaboration Resource from the main menu.
  2. Choose Network Element Device Management > eIMS Management > eIMS Device from the navigation tree on the left.
  3. In the device list, click a device name.
  4. In the navigation tree, choose Configuration Data > Configuration item. Configuration information about this configuration item is displayed in the right area.

    Perform the following operations in the configuration information area.

    Task

    Operation

    Export

    You can export configuration data and use the data for backup and storage.

    1. Click Export and choose Export selected or Export all.
    2. Open or Save the information.

    Refresh

    Refresh the information of configuration data on current page.

    Details

    You can perform this operation to view configuration data details.

    1. Click Name of the configuration data to be queried.
    2. Browse detail information of the configuration data on new page.
    3. Click Back to return to the Configuration Data page.

Translation
Download
Updated: 2019-06-30

Document ID: EDOC1100044378

Views: 58319

Downloads: 268

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next