No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


eSight V300R010C00SPC200, 300, and 500 Operation Guide 09

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Adding a Diagnosis Source Group

Adding a Diagnosis Source Group

Diagnosis sources (devices supporting SLA, such as routers or switches) are used for conference site maintenance and conference assurance. Multiple diagnosis sources constitute a diagnosis source group, providing the conference assurance and routine network diagnosis functions.


  1. Choose Resource > Collaboration Resource from the main menu.
  2. In the navigation tree on the left, click Network Element Device Management > Telepresence Conference > Site Maintenance.
  3. Click Diagnosis Source Group.
  4. Click Create.
  5. Set parameters.
  6. Click Save.
  7. (Optional) Click the option button under Default Diagnosis Source Group to set a diagnosis source as the default diagnosis source.
Updated: 2019-09-12

Document ID: EDOC1100044378

Views: 69371

Downloads: 371

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next