No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSight V300R010C00SPC200, 300, and 500 Operation Guide 09

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Managing the Terminal Certificate

Managing the Terminal Certificate

The certificate upload operation is required for certificate update or when a customer wants to use its own certificate. You can quickly replace the certificate file using the certificate upload function.

Prerequisites

  • You have the right to operate the Certificate Management menu.
  • The root certificate, certification store files and keystore password are available.

Context

If the built-in certificate of eSight is used, security risks exist. You are advised to replace the built-in certificate file with your own one to improve system security.

  • Each eSight system has a unique root certificate, used to verify devices and applications.

    The root certificate of a device must be the same as the root certificate on the eSight.

  • Certification Store is used is used by the eSight itself for encrypted data transmission.
  • Keystore Password is used to check whether the Certification Store is valid or not. When the value of Keystore password is same as the Keystore password which is uploading, the certificate store will upload successfully.

Procedure

  1. Choose Resource > Collaboration Resource from the main menu.
  2. In the navigation tree on the left, choose Terminal Device Management > System Configuration.
  3. In eSight Upload Certificate area, specify the paths of the Root Certificate, Certification Store, and enter the Keystore Password.
  4. Click OK.
  5. Restart the eSight for the new certificates to take effect.
Translation
Download
Updated: 2019-09-12

Document ID: EDOC1100044378

Views: 70619

Downloads: 373

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next