No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSight V300R010C00 Operation Guide 08

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Enabling the VXLAN Tunnel Packet Statistics Function on the Device

(Optional) Enabling the VXLAN Tunnel Packet Statistics Function on the Device

This section uses Huawei CloudEngine 12800 V200R019C00 as an example. For other device models, see the corresponding device configuration manual.

<CE12800>system-view
[~CE12800]interface nve 1  //Create an NVE interface and enter the NVE interface view. In the information, 1 is the ID of the NVE interface. Since the VXLAN tunnel information needs to be deployed on the NVE interface, you need to create an NVE interface. 
[~CE12800-Nve1]vxlan statistics peer 10.10.10.10  vni 1 enable    //Enable the VXLAN tunnel packet statistics function. 10.10.10.10 is the IP address of the remote VTEP. This IP address can also be set to the IPv6 address of the remote VTEP, which is a 32-bit hexidecimal number in the X:X:X:X:X:X:X:X format. 1 is the VNI ID. If the VNI ID is specified, the device collects statistics on packets based on the VXLAN tunnel and VNI. If the VNI ID is not specified, the device collects statistics on packets based only on the VXLAN tunnel. The two functions cannot be both configured. For example, if vxlan statistics peer 10.10.10.10 vni 1 enable is configured, vxlan statistics peer 10.10.10.10 enable cannot be configured. 
[~CE12800-Nve1]commit
Translation
Download
Updated: 2019-08-03

Document ID: EDOC1100044378

Views: 65172

Downloads: 344

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next