No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSight V300R010C00SPC200, 300, and 500 Operation Guide 09

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Do I Enable TLSv1 of the FTPS Protocol

How Do I Enable TLSv1 of the FTPS Protocol

Question

How do I enable TLSv1 of the FTPS protocol?

Answer

The FTPS protocol of the eSight supports TLSv1.1 and TLSv1.2 by default. To allow access of NEs only supporting TLSv1, you need to change the SSL protocol version corresponding to the FTPS supported by the eSight to TLSv1.

NOTE:

TLSv1 is an insecure protocol. Using TLSv1 may cause security risks. You are advised to use the TLSv1.1 and TLSv1.2 protocol.

Linux Operating System
  1. Log in to the eSight server as user ossuser.
  2. Navigate to the directory for saving the configuration file.

    cd eSight installation directory/AppBase/sysagent/etc/sysconf/svcbase

  3. Edit the configuration file.

    vi med_node_1_svc.xml

    In the ftps configuration area, set ssl.protocol to TLSv1,TLSv1.1,TLSv1.2.

                            <config name="ftps"> 
    ... 
                                    <param name="ssl.protocol">TLSv1,TLSv1.1,TLSv1.2</param> 
    ... 
                            </config>     

    After the modification is complete, press Esc and run the :wq! command to save the modification and exit.

  4. Restart the eSight services.
Windows Operating System
  1. Log in to the eSight server as user Administrator.
  2. Navigate to the directory for saving the configuration file.

    eSight installation directory/AppBase/sysagent/etc/sysconf/svcbase

  3. Edit the configuration file.

    med_node_1_svc.xml

    In the ftps configuration area, set ssl.protocol to TLSv1,TLSv1.1,TLSv1.2.

                            <config name="ftps"> 
    ... 
                                    <param name="ssl.protocol">TLSv1,TLSv1.1,TLSv1.2</param> 
    ... 
                            </config>     

    After the modification is complete, save the modification and exit.

  4. Restart the eSight services.
Translation
Download
Updated: 2019-09-12

Document ID: EDOC1100044378

Views: 82973

Downloads: 403

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next