No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSight V300R010C00SPC200, 300, and 500 Operation Guide 09

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Adding a Single eIMS Device

Adding a Single eIMS Device

Before you manage eIMS devices using eSight, register and authenticate them.

Prerequisites

  • eSight eIMS Device Manager component has been installed.
  • You have logged eSight client.
  • You have obtained the information of the device.
  • You have been assigned the operation rights of managing the eIMS object groups and eIMS devices.

Procedure

  1. Choose Resource > Common from the main menu. Then choose Add Resource > Add Resource in the navigation tree on the left. The Add Resource page is displayed.
  2. Choose eIMS Device > CCS9000.
  3. Enter core network information.

    • Enter IP address and Name and select Subnet and Device type in Basic Information.
    • Optional: Set location, Vendor, and Remark.
    • If Device type is eCGPOMU, set Connection mode in SSL Connect Information and specify whether to enable the Allow anonymous function.
    • Set SNMP parameters.
    NOTE:

    Contact the NE administrator for SNMP parameters.

  4. Click Apply.

    NOTE:
    • After the eCGPOMU is added, its managed sub-NEs are automatically added.
    • If you want to register other eIMS devices, repeat the preceding steps to specify the desired registration information on the current page. If you have finished eIMS device registration, click OK.

  5. Click Yes in the Confirm dialog box.
  6. Verify the registration information.

    NOTE:

    If the adding is successful, eSight will initiate a connection to the eIMS device. In the eIMS device registration information list, if the management status of the eIMS device changes from Offline to Online in the Connection Status column, the eIMS device is successfully registered.

Translation
Download
Updated: 2019-09-12

Document ID: EDOC1100044378

Views: 70134

Downloads: 373

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next