No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSight V300R010C00 Operation Guide 07

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Smart Configuration Tool Introduction

Smart Configuration Tool Introduction

This section describes the definition, functions, application restrictions, and key indicators of the smart configuration tool.

Definition

The smart configuration tool provides a GUI for users to deliver configurations.

Functions

With the smart configuration tool, you can configure services for devices in batches by template and planning table.

Figure 12-20 Smart Configuration Tool

A template is used to configure the same services for multiple NEs in batches. A planning table is used to configure similar services for multiple NEs in batches. You can receive task execution results by email for periodical delivery tasks.

Delivering Configurations Using a Template

You can use the preconfigured template or customize a template to deliver configurations to multiple devices. The tool provides a wizard to guide you through the delivery.

Delivering Configurations Using a Template Planning Table

To deliver configurations to Huawei devices using a template planning table, export the table and enter service configuration parameters in the table. Then import the table to the smart configuration tool. The tool provides a wizard to guide you through the delivery.

Delivering Configurations Using a Command Planning Table

To deliver configurations to Huawei and non-Huawei devices using a command planning table, export the table and enter commands in the table. Then import the table to the smart configuration tool. The tool provides a wizard to guide you through the delivery.

Configuration Task

You can uniformly manage all delivery tasks on the Configuration Task page. You can view and delete tasks, and modify, enable, or disable periodic tasks. You can also view historical task delivery records and modify commands to re-deliver failed tasks.

Application Restrictions

  • It is time-consuming to provision a large amount of device configuration data. Therefore, execute the provisioning task during off-peak hours to avoid affecting network services.
  • To improve the success rate of configuration data provisioning, disable the function of sending logs from devices to the console.
  • Do not deliver the reboot command. If a device is restarted, eSight will be unable to check whether the command is delivered successfully.
  • When using the intelligent configuration tool to edit a command to be delivered, take the view where the command is located. For example, the quit command cannot be delivered in the system view.
  • Some user interaction commands are automatically delivered by eSight protocol stacks, and cannot be delivered by users again. .
  • The intelligent configuration tool supports a maximum of 800 templates and directories in total.

KPIs

None

Translation
Download
Updated: 2019-06-30

Document ID: EDOC1100044378

Views: 57693

Downloads: 264

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next