No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSight V300R010C00 Operation Guide 07

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Typical Configuration Examples

Typical Configuration Examples

This section describes typical configuration examples in typical application scenarios, helping users complete various operations based on the actual scenarios.

Delivery by Template

This topic describes how to deliver the same parameters of the same commands to different NEs by template.

Scenario

Ikarus is the network administrator in company M that has deployed a wireless network to transform the existing network. When the hardware is deployed, to enable network connection, Ikarus wants to configure the same parameters on the three ACs.

  • Ikarus can choose to configure AC parameters on the three devices, which is cumbersome and error-prone.
  • Ikarus can also choose to configure the same parameters on multiple devices in batches by using template delivery, which also verifies delivered commands to ensure configuration correctness.
Data Plan
Table 12-30 AC configuration information

Device IP

Device Name

VlanIf

AP Authentication Mode

Forwarding Type

Country Code

192.168.0.1

WLAN_AC_01

vlanif10

mac-auth

ap

CN

192.168.0.2

WLAN_AC_02

vlanif10

mac-auth

ap

CN

192.168.0.3

WLAN_AC_03

vlanif10

mac-auth

ap

CN

Procedure
  1. Choose Resource > Network > Configuration > Smart Configuration Tool from the main menu.

  2. In the navigation tree, choose Template Deploy, and choose Huawei > WLAN Configuration > SPU, ACU2, AC6605 and AC6005 > V200R005 > V200R005C10 > Configure AC in the template table.
  3. Select the template and click . The system displays the wizard for delivering the template.
  4. The template delivery wizard is displayed. Modify the start and end VLAN IDs as required, and click Next.

    NOTE:
    • Parameters marked with an asterisk (*) are mandatory. If a parameter marked with an asterisk (*) is left blank, the template will not contain this command.
    • The smart configuration tool provides default settings. You can modify parameters based on the site scenario.

  5. In the device selection step, click . The dialog box for selecting a device is displayed and the list of devices that have been loaded to eSight is displayed in the dialog box. Select the three devices whose IP addresses are 192.168.0.1, 192.168.0.2, and 192.168.0.3 respectively, and click OK. Close the device list, back to the original page, and click Next.
  6. In the task configuration step, enter a task name, and select Instantly.
  7. (Optical) Select Restore after failure. In the dialog box that is displayed, choose I have understood the consequence of the operation and confirm to perform the operation. and click OK.

    NOTE:

    If Restore after failure is selected, eSight automatically backs up the configuration file of the device before the template is delivered. When the template fails to be delivered, eSight automatically restores the device running configuration file, which is time-consuming.

  8. Click Deploy. In the dialog box that is displayed, choose I have understood the consequence of the operation and confirm to perform the operation. and click OK.
  9. In the navigation tree, click Deploy Tasks. The task execution progress and details about devices to which the task is delivered are displayed in the task list.

Delivery by Plan Sheet

This topic describes how to deliver different parameters of the same commands to different NEs by plan sheet.

Scenario

Ikarus is the network administrator in company M that has deployed a wireless network to transform the existing network. When the hardware is deployed, to enable network connection, Ikarus wants to configure different parameters on the three ACs.

  • Ikarus can choose to configure AC parameters on the three devices, which is cumbersome and error-prone.
  • Ikarus can also choose to configure different parameters on multiple devices in batches by using plan sheet delivery, which also verifies delivered commands to ensure configuration correctness.
Data Plan
Table 12-31 AC configuration information

Device IP

Device Name

VlanIf

AP Authentication Mode

Forwarding Type

Country Code

192.168.0.1

WLAN_AC_01

vlanif10

mac-auth

ap

CN

192.168.0.2

WLAN_AC_02

vlanif10

mac-auth

ap

CN

192.168.0.3

WLAN_AC_03

vlanif10

mac-auth

ap

CN

Configuration Roadmap
  1. Export a plan sheet.
  2. Modify the plan sheet.
  3. Deliver the plan sheet.
Procedure
  1. Export a plan sheet.

    1. Choose Resource > Network > Configuration > Smart Configuration Tool from the main menu.

    2. In the navigation tree, choose Template Deploy, and choose Huawei > WLAN Configuration > SPU, ACU2, AC6605 and AC6005 > V200R005 > V200R005C10 > Configure AC in the template table.
    3. Click .
    4. Click OK. Save the plan sheet to the local host.

  2. Modify the plan sheet.

    Enter planned data in the plan sheet.

    NOTE:

    Device names and IP addresses in the plan sheet must exist on eSight. If device names or IP addresses do not exist on eSight, the import will fail.

  3. Deliver the plan sheet.

    1. In the navigation tree, choose Plan Table Deploy. The wizard for delivery by plan sheet is displayed.
    2. Click and select the file to load in the dialog box that is displayed.
    3. Click Import. Information such as the Name, IP Address, and Type in the plan sheet is displayed.
    4. Click Next. The Set task page is displayed.
    5. Enter a task name, and select Instantly.
    6. (Optical) Select Restore after failure. In the dialog box that is displayed, choose I have understood the consequence of the operation and confirm to perform the operation. and click OK.
      NOTE:

      If Restore after failure is selected, eSight automatically backs up the configuration file of the device before the template is delivered. When the template fails to be delivered, eSight automatically restores the device running configuration file, which is time-consuming.

    7. Click Deploy. In the dialog box that is displayed, choose I have understood the consequence of the operation and confirm to perform the operation. and click OK.
    8. In the navigation tree, click Deploy Tasks. The task execution progress and details about devices to which the task is delivered are displayed in the task list.

Translation
Download
Updated: 2019-06-30

Document ID: EDOC1100044378

Views: 59017

Downloads: 270

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next