No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSight V300R010C00SPC200, 300, and 500 Operation Guide 09

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Adding Devices to eSight

Adding Devices to eSight

Three methods are available for adding devices to eSight.

Single addition

One device is added at a time. This mode applies when you want to add one or a few devices to eSight during normal network running.

Automatic discovery

Devices in one or more network segments are added at a time. This mode applies when devices are distributed in one or multiple network segments and devices in the same network segment have the same SNMP parameter settings.

Batch import

Multiple devices with different IP addresses are added at a time through an Excel file. This mode applies in new site deployment scenarios where devices are dispersed in multiple network segments.

NOTE:

If you directly perform other operations after device addition without setting Telnet parameters, some functions will not take effect. To facilitate subsequent operations, set Telnet parameters when adding devices.

  • Single addition
    1. Choose Resource > Common > Add Resource > Add Resource from the main menu.

    2. Set SNMP and Telnet parameters.
      • The alarm management of eSight does not support SNMPv1. To manage device alarms using eSight, you must use SNMPv2c or SNMPv3.
      • SNMPv1 and SNMPv2c are not secure, and may have security risks. You are advised to use the more secure SNMPv3.

  • Automatic discovery
    1. Choose Resource > Common > Add Resource > Automatic Discovery from the main menu.

    2. Select the automatic discovery mode and set related parameters.
      • The alarm management of eSight does not support SNMPv1. To manage device alarms using eSight, you must use SNMPv2c or SNMPv3.
      • SNMPv1 and SNMPv2c are not secure, and may have security risks. You are advised to use the more secure SNMPv3.
      • When setting the SNMP protocol, exercise caution when selecting the automatic matching template. If automatic matching template is selected, all SNMP templates on eSight are used one by one to add devices until a correct SNMP template is matched. If there are too many failures before the matching succeeds, the exception protection mechanism may be triggered for some devices. As a result, the devices are locked. Locked devices cannot be added to eSight during the lock period. The devices can be added to eSight only after they are unlocked.

    3. Set Telnet protocol parameters.
      1. Choose Resource > Network > Equipment > Network Device from the main menu.

      2. Select devices. Choose Set Protocol > Set Telnet Parameters from the navigation tree and set related parameters.

  • Batch import
    1. Choose Resource > Common > Add Resource > Import Resource from the main menu.

    2. Download a template and upload it again after editing.
      • The alarm management of eSight does not support SNMPv1. To manage device alarms using eSight, you must use SNMPv2c or SNMPv3.
      • SNMPv1 and SNMPv2c are not secure, and may have security risks. You are advised to use the more secure SNMPv3.

    3. Set Telnet protocol parameters.
      1. Choose Resource > Network > Equipment > Network Device from the main menu.

      2. Select devices. Choose Set Protocol > Set Telnet Parameters from the navigation tree and set related parameters.

Translation
Download
Updated: 2019-09-12

Document ID: EDOC1100044378

Views: 84732

Downloads: 407

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next