No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSight V300R010C00 Operation Guide 07

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Discovering Storage Device Links

Discovering Storage Device Links

eSight storage device links include links of storage service ports and management ports. Service port links support both FC switches and IP switches. Management port links support only IP switches. For links of IP switches, you need to perform operations in this section to automatically discover physical topology links of storage devices. Links of FC switches can be automatically discovered to the topology.

Precautions

  • The Network Device Manager has been installed.
  • The Storage Device Manager has been installed.

Context

Table 7-6 describes the IP switch links that can be discovered by storage devices.
NOTE:

Storage service interface links support all Huawei storage devices. Management interface links support Huawei OceanStor 5300 V3 series, OceanStor 5500 V3 series, OceanStor 5500 V5 series, OceanStor S5500T (S3900-M200/S3900-M300), Oceanstor Dorado2100 G2/Dorado5100/Dorado5000 V3, and all low-end enterprise storage devices. For details about low-end enterprise storage devices, see the list of supported devices released with the version.

Table 7-6 IP switch links

Link Name

Link Discovery Mode

Storage service port link

MAC

Storage management port link

MAC

Procedure

  1. Configure automatic discovery for terminals.

    1. Choose Resource > Network > Equipment > Terminal Resources from the main menu.
    2. In the navigation tree on the left, choose Resource Management > Discovery Rule.
    3. Set Automatic Terminal Discovery to Enable.
    4. Click Apply.

  2. Connect storage devices.

    For details about how to connect storage devices, see Connecting to a Device.

  3. Discover the terminal immediately.

    1. Choose Resource > Network > Equipment > Terminal Resources from the main menu.
    2. In the navigation tree on the left, choose Resource Management > Terminal Access Record.
    3. Click Immediate Discovery.

  4. Refresh storage devices.

    Choose Resource > Storage Subnet from the main menu.
    1. In the navigation tree on the left, choose Storage > Storage Device.
    2. In the information area on the right, click in the Operation column of the storage device to update the device.

Translation
Download
Updated: 2019-06-30

Document ID: EDOC1100044378

Views: 58301

Downloads: 268

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next