No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSight V300R010C00 Operation Guide 08

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Customizing Alarms

Customizing Alarms

eSight alarm management supports alarm customization. It can monitor and manage custom alarms by receiving SNMP Trap packets that are not preconfigured or allowing users to configure alarms.

Context

If users want eSight to process alarms that are not preconfigured, provide detailed packet information for R&D engineers. As eSight provides the alarm customization capability, users can automatically configure alarms that are not preconfigured in a timely manner.

Procedure

  • Creating an alarm manually
    1. Choose Fault > Custom Alarms from the main menu and choose Custom Alarms Management from the navigation tree on the left.
    2. Click and select Manually.
    3. Customize an alarm.

      NOTE:
      • User settings are displayed after alarms are reported. Ensure that the settings are correct.
      • When different types of devices use the same Trap OID (clearance OID), if the OIDs in the packet VB information of different devices are different, the public part in the location and additional information of different devices must be configured. If private information of a device is configured, the private information cannot be displayed on other devices.
    4. Click Save.
  • Creating an alarm based on a packet

    When you customize alarms using packets, enable the function for eSight to receive and collect Trap packets in advance. The process is as follows:

    1. Choose Fault > Custom Alarms from the main menu and choose Trap Packets Management from the navigation tree on the left.
    2. Enable the packet receiving function and set the time to disable this function.
    1. Choose Fault > Custom Alarms from the main menu and choose Custom Alarms Management from the navigation tree on the left.
    2. Click and select Packet-based.
      NOTE:

      You can also choose Fault > Custom Alarms from the main menu and choose Trap Packets Management from the navigation tree on the left.

    3. In the dialog box that is displayed, select a Trap packet as required and click Create.
    4. Customize an alarm.

      NOTE:
      • User settings are displayed after alarms are reported. Ensure that the settings are correct.
      • When different types of devices use the same Trap OID (clearance OID), if the OIDs in the packet VB information of different devices are different, the public part in the location and additional information of different devices must be configured. If private information of a device is configured, the private information cannot be displayed on other devices.
    5. Click Save.
Translation
Download
Updated: 2019-08-03

Document ID: EDOC1100044378

Views: 63934

Downloads: 344

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next