No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSight V300R010C00 Operation Guide 07

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
What Should I Do When IP PBXs Cannot Report Alarms Through the SNMPv3 Protocol in NAT Traversal Scenarios

What Should I Do When IP PBXs Cannot Report Alarms Through the SNMPv3 Protocol in NAT Traversal Scenarios

Problem

IP PBXs cannot report alarms through the SNMPv3 protocol in NAT traversal scenarios.

Solution

If IP PBXs report alarms through the SNMPv3 protocol in NAT traversal scenarios, you must configure port mapping for the protocol on the firewall, switch, or router. For details, see the Product Documentation of each device.

Translation
Download
Updated: 2019-06-30

Document ID: EDOC1100044378

Views: 59131

Downloads: 270

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next